Volume

A standard antifreeze jug typically holds 1 gallon or 3.78 liters of antifreeze fluid.

1 liter = 1000 ml

6.5 liters = 6.5 x 1000 ml = 6500 ml

A 1991 Mercedes 300E typically requires around 7.5 quarts of oil for an oil change. It's always best to refer to your specific vehicle's owner's manual to get the most accurate information.

The number of trees that equal 1 cubic meter depends on the size of the trees. On average, a mature tree with a trunk diameter of 12 inches can yield about 1 cubic meter of wood when converted. However, this number can vary depending on the species and age of the tree.

A standard sherry glass typically holds around 2-3 fluid ounces.

It hold 20 gallons.

It hold 20 gallons.

Fill a beaker or measuring cylinder with water and record the volume of water indicated.

Put the rock in the beaker/measuring cylinder and record the new volume of water indicated.

The difference between the two volumes is the volume of the rock.

1 Mcf (thousand cubic feet) is equivalent to 1,000 cubic feet.

One gallon is greater because it is 128 fluid ounces.

Only if you think of pure water 1 kg is 1 cubic decimeter. 1 cubicmeter of water weighs 1 ton and that is 1000 kilograms. But forget syrup and oil. You need the specific weight (density) there. Use this fine little helper. Scroll down to related links and look at "Weight and Mass".

The cost of 11 gallons of gas depends on the current price per gallon at the gas station. You can calculate the total cost by multiplying the number of gallons (11) by the price per gallon.

There are approximately 15 macro drops in 1 ml.

5 cL is 1.7 fl oz.

Well, 1.6907, to be more precise.

There are 35 gallons in 140 quarts. This can be calculated by dividing the number of quarts by 4, as there are 4 quarts in a gallon.

A gallon is a unit of volume measurement that is commonly used in the United States. It is equivalent to 128 fluid ounces or 3.785 liters. Visualizing the size of a gallon can be difficult, but it is roughly comparable to four quarts or eight pints.

1 quart = 32 oz. (fl)

1 pints = 1/2 quart,

1 pints = 1/2 x 32 oz (fl) = 16 oz (fl),

9 pints = 9 x 16 oz (fl) = 144 oz. (fl)

There are 1,000,000 centicubes in one cubic meter. This is because there are 100 centimeters in one meter, and each side of the centicube is 1 centimeter in length. Therefore, (100 x 100 x 100) = 1,000,000 centicubes in one cubic meter.

No. I'm not being disagreeable, it's just that this conversion isn't possible.

"Kg" is a unit of mass, and "cubic feet" is a unit of area. They measure completely

different quantities, and neither one can be converted to the other one.

There are 5000 cubic centimeters (cc) in 5 liters.

Yes, 850cc is equal to 850ml because 1cc (cubic centimeter) is equivalent to 1ml (milliliter) in volume measurement.

To convert 1 gallon, 1 cup to fluid ounces, first convert the gallon to 128 fluid ounces (1 gallon = 128 fl oz). Then, add the 1 cup, which is equivalent to 8 fluid ounces. So, 1 gallon, 1 cup equals 128 fl oz + 8 fl oz = 136 fluid ounces.

1 uk gallon = 4.54609 litres, so 5.7 * 4.54609 = 25.9127 litre

8 fluid oz is 1 cup, 2 cups is 1 pint, 2 pints is 1 quart, and 4 quarts is a gallon. So, 8x2x2x4=128 oz in a gallon. Divide that by two for half a gallon and you get 64 oz in half a gallon, not 72 oz.

A cubic metre is a unit of volume. A hectometre is a unit of length. The two units are therefore incompatible.