0
Volume
Questions about the various units and conversions of volume. This category is also home to questions which ask the volume of certain objects given length, width, and height.
26,790 Questions
What does 2.5 L plus 800 milliliter equal?
2.5 L = 2500 mL
2500 mL + 800 mL = 3300 mL
3300 mL = 3.3 L
OR
800 mL = 0.8 L
2.5 L + 0.8 L = 3.3 L
What metric measurement would you use to measure volume?
The metric measurement used to measure volume is the liter (L).
What is the carrying capacity of a box car that is 55 feet by 18 feet in cubic yards?
It is not possible to calculate the capacity in cubic yards when only two of the three relevant measures (length, width and height) are given. Assuming the two given numbers are the length and width, the capacity depends on the stack - which could be microscopically thin, or several miles high!
How many CBM Cubic Meters in 1000 sheets of Plywood of 8ftx4ftx18mm Length x Width x thickness?
To find the volume of plywood in cubic meters, you would first convert the dimensions to meters: 8ft = 2.44m, 4ft = 1.22m, and 18mm = 0.018m. Then you multiply these dimensions together to get the volume of one sheet in cubic meters (2.44m x 1.22m x 0.018m). Finally, you multiply this volume by the quantity of sheets (1000) to find the total volume in cubic meters.
How many liters are in 14.7 kl?
Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Liters are three places to the right of kiloliters. So you have to move the decimal place three times to the right. You will get .07 kl = 70 L.
What is 37'854'120 liters in milliliters?
37854120000 mlThere are 1000 milliliters in 1 liter.
One milliliter is 0.001 liter.
How much bleach to treat 7000 gallons of water?
To treat 7000 gallons of water for drinking, you can use approximately 28 ounces of regular household bleach (5.25% sodium hypochlorite concentration). This amount of bleach can help disinfect the water to make it safe for consumption. Make sure to mix the bleach thoroughly and let it sit for about 30 minutes before using the water.
How do you measure the volume of water in a jam jar?
You can measure the volume of water in a jam jar by pouring a known quantity of water into the jar and then using a measuring cup or graduated cylinder to measure the volume of water that was added. Alternatively, you can fill the jam jar to the brim with water and then pour the water into a measuring cup to determine the volume.
How many cubic millimeters in a square meter?
A cubic meter is one square meter on each side of a cube. Think of a box which is one meter long on each side. A square meter has no height, so you can't really say how many square meters are in a cubic meters.
How much does an ounce cost in washington?
The price of an ounce of marijuana in Washington state can vary depending on the quality and strain, but typically ranges from $150 to $300 at a licensed dispensary. It's important to note that prices may fluctuate based on supply, demand, and location within the state.
What measurement is used to measure liquid volume?
The measurement used to measure liquid volume is typically in liters or milliliters.
How many cups of blueberries are in 1.5 pints?
3 cups
In US measure, 1 pint = 2 cups And 1 cup = 0.5 pint.
There are 16 US fluid ounces, 2 cups in 1 US pint (473.2 ml).
Although there are 20 Imperial fluid ounces in 1 Imperial pint (568.3 ml), the Imperial system does not have cups, so it is best to use half pints.
How do you convert 150 cubic yards into just yards?
Converting cubic yards to yards doesn't make sense. Cubic yards measure volume, and yards measure distance.
How do you convert volume in cubic centimeters to milliliters?
To convert volume in cubic centimeters (cm^3) to milliliters (mL), you can use the fact that 1 cm^3 is equal to 1 mL. Therefore, if you have a volume in cm^3, you can simply state it as the equivalent volume in mL.
How man cups in 175 ml bottle?
Assuming you're referring to a standard cup size of 250 ml, there would be approximately 0.7 cups in a 175 ml bottle.
Is 1.50 cm3 greater than less than or equal to 1.50 x 103 nm3?
Both recalculated in SI-units for volume m3 will give the first one is greater:
- 1.50 cm3 = 1.50*10-6 m3
- 1.50*10+3 nm3 = 1.50*10+3([nm]3) / ([109nm/m])3 = 1.50*10+3 * (10-27) [m3] = 1.50*10-24m3
Keep in mind that 1 nm = 1*10-9 m,
so when cubed, symbolised by [.]3 , it gives:
[1 nm]3 = [1*10-9 m]3 = 1*10-27 m3 = 1 nm3 (!!)
What is the basic SI unit of volume called?
In the SI system, the base unit for mass is kilogram.
The SI system is the latest and current version of the metric system. Previous versions included the mksA system and the cgsA system.
Not all metric units are SI units. For example, in the now-defunct cgsA system, the gram was the base unit for mass, while the centimetre is a 'non-preferred' SI unit (because SI prefixes are based on 10 raised to the power of multiples of 3 -e.g. micro, milli, kilo, mega, etc.).
Interestingly it's the only SI unit today that is defined by an item rather than a physical property. Also, it's the only SI base unit that includes an SI prefix (kilo). The basic SI unit for mass is kilogram. In total, there are seven SI base units. The kilogram.
The kilogram is the SI (International System) unit of mass. See links to the left for more information about all SI units
Some other units of mass are: Gram, g (1 kg = 1000 grams; 1 gram = 0.001 kg) Milligram, mg (1 kg = 1,000,000 mg; 1 mg = 0.000001 kg) Pound, lb (1 kg = 2.20462 lb; 1 lb = 0.45359 kg) Ounce, oz (1 kg = 35.2739 oz; 1 oz = 0.028349 kg; 1 lb = 16 oz) Tonne, t or Mt, also metric ton (1 kg = 0.001 T; 1 T = 1000 kg) Ton, also short ton, (1 kg = 0.001102 t; 1 T = 907.1847 kg; 1 T = 2000 lb)
How many is 0.51 Liters in an Kiloliters?
1000 litres = 1 kilolitre so 0.51 litres = 0.51/1000 = 0.00051 kL
How many cubic meters in a millimeters?
Cubic metres is a measure of volume but millimetres is a lineal measure (length, distance etc.) The two units are incompatible and cannot be converted.
