Volume

A quart is 32 ounces.

A gallon is 128 ounces.

3 fl oz is 88.7cc

17oz = 481.9g

400 cubic feet does not directly convert to square feet as they are measuring different dimensions. Cubic feet measure volume (3-dimensional space) while square feet measure area (2-dimensional space). To find the square footage of a shape with a volume of 400 cubic feet, you would need additional information about the shape (such as height or depth).

Snow is not uniform for density so you would have to weigh the cubic foot you are interested in.

Each pound or kilogram would be composed of 1/9 hydrogen and 8/9 oxygen (by mass) since the molecular weight of water is 18, the atomic weight of hydrogen is 1 and the atomic weight of oxygen is 16. Based on 1 cubic foot of snow being about 10% the weight of a cubic foot of water, it would weigh approximately 6.25 pounds and contain about 5.56 pounds of oxygen.

-117 F There's a discrepancy between the answer above and the answer below, which comes from http://www.injectorall.com/MSDS250.htm under "IX. PHYSICAL AND CHEMICAL PROPERTIES": Freezing Point: -89 0C -127 0F If the -117 F is for a water/alcohol mixture, that might explain the discrepancy since the second set of numbers (-89C/-127F) is for anhydrous (no water present) isopropyl alcohol (isopropanol). There could also be a data entry error in the first instance . . .

no english cups , just pints and half pints.

There are approximately 18,750 pennies in a 5-gallon water bottle.

1 Ounce = 2 tablespoons

1 tablespoon = 0.5 ounce

There is no direct conversion between grams and milliliters in this case because the volume of gelatin can vary based on its density and form. It's best to refer to the specific packaging or instructions provided for the gelatin product you are using, as it will typically indicate the amount of water needed to dissolve it.

A distillation flask is a piece of laboratory equipment that holds a substance to be distilled. The advantage of using a distillation flask whose capacity is greater than volume of liquid is the loss of heat.

There are 42.512 ml in 1.5 oz.

Answer: 1.25 L = 42.2675 fl oz(US)

You would need approximately 5-8 pints of gravy to serve 80 people, depending on how much gravy each person typically uses. It's generally a good idea to have extra to account for preferences and second servings.

There is no exact equivalence between pats and tablespoons, as pats of butter are usually measured by weight and tablespoons by volume. However, a common estimation is that 1 pat of butter is roughly equivalent to 1 tablespoon.

There are 236.588 milliliters in half a cup of water.

This cannot be determined because tablespoons/teaspoons are measures of volume and grams is a measure of weight or mass.

For teaspoons multiply ml by 5. - For ounces multiply ml by 28.34

Not necessarily. A spoonful could refer to using any size spoon to scoop a certain amount, whereas a teaspoon specifically refers to a standardized measurement equal to 5 milliliters.

To convert from milligrams (mg) to milliliters (mL), you need to know the density of the substance. However, if we assume the substance is water, 88 mg would be approximately 0.088 mL, since the density of water is 1 g/mL.

Depends entirely WHAT the dry powder is.

this is a very very hard question but the answere you r lookin for is definitaly DENSITY gaurnteed

30 ml = 6.08652409 US teaspoons (about 6).

volume = length * width * height

volume = 88.4 , length = 7.6 meters, width = 8 meters, height = h

88.4 = 7.6 * 8 * h

88.4 = 60.8 * h 7.6 * 8 = 60.8

88.4 / 60.8 = h Divide both sides by 60.8

1.454 = h 88.4 / 60.8 = 1.454

Note: It doesn't matter which of the dimensions is where for a rectangular prism since the three are simply multiplied together. If one dimension is 7.6 and the second is 8 and the volume is 88.4, the third dimension will be 1.454