Volume

60 US fluid ounces = about 1.77 liters.

1 pint = 16 fluid ounces

2.7 pints = 43.2 fluid ounces

There are generally 8 ounces of cavatappi pasta noodles in a cup when measured by volume. Different pasta shapes can vary slightly in their volume-to-weight ratios, so it's best to weigh the pasta for precise measurements.

That completely depends on the temperature and pressure at which it's stored.

Ever hear the statement that a gas has no definite size or shape ?

That's right. If I give you some hydrogen, you can store it in as few or as many

cubic feet as you like. Give it a big container, and it'll fill the whole thing. Make

the container smaller, and it'll still all fit.

Did you ever let some air out of a tire and find that most of the tire was still full

but this little section of it over here was empty ?

Come on. Learn your gas!

20 percent of 50 gallons is 10 gallons. You can find this by multiplying 50 by 0.20.

To calculate the volume of a unit cell, we need to cube the atomic radius. So, the volume of the unit cell of copper can be calculated as (0.128 nm)^3 = 0.002097152 nm^3. To convert this to cubic meters, we need to convert nm to meters by dividing by 1 billion (since 1 meter = 10^9 nm), giving a volume of approximately 2.097 × 10^-29 cubic meters.

A 4 x 4 x 4 inch jar typically has a volume of 64 cubic inches. To convert this to ounces, you would need to know the density of the material the jar is made of. Without that information, it is not possible to provide an accurate conversion to ounces.

Various quantities and characteristics associated with ice may be measured

in units of weight (pounds), mass (kilograms), cost (dollars, lire, etc.), or

temperature (degrees C or F), etc.

A centimetre is a unit of distance. A millilitre is a unit of volume. The two units are therefore incompatible.

1kg = 1000g ice will have volume:

Density = mass /volume

Volume = mass / density

Volume = 1000/0.92

Volume = 1,086.95ml = 1,087ml

1,087 ml = 1.087 liters.

For water, 1 gram equals 1 milliliter as water has a density of 1 gram per milliliter. However, for other substances, the conversion between grams and milliliters can vary based on the substance's density.

Volume is a measure of the amount of space occupied by an object. Volume is the measure of the amount of space an object takes up, usually measured in centemeters cubed. You can measure it in liters, and milliliters as well.
Volume measures 3d physical space: length, height and depth.

To convert cubic meters to metric tons, you would need to know the density of the wood chips. Different types of wood chips have different densities, so this information is needed to provide an accurate conversion. Once you have the density, you can use the formula: weight (ton) = volume (cubic meters) x density (ton/cubic meter).

To convert grams to liters, you need to know the density of the substance. Once you have the density, you can use the formula: volume (in liters) = mass (in grams) / density (in g/mL). So, if you have the density of the substance, you can divide 0.770 grams by the density to get the volume in liters.

Undeterminable. 36 by 6 What? Feet? Meters? And gallons is a VOLUME. You should provide 3 dimensions: Height, Width and length to get a volume to convert to. Maybe you mean a 6 Foot Deep Pool that is 36 Feet diameter. that would be 3 dimensions as a circle has an area of Feet x Feet.

Simple enough; as it's practically impossible to measure the outside dimensions of an object that complex to calculate it, you need to find out how much fluid it displaces.

Fill a calibrated beaker or bowl (one that has measurement lines along the side) big enough to hold your object, in this case a crown. Make a note of the original volume of fluid.

Submerge the crown in the fluid and note what the new volume, then subtract the original volume from the new volume and that's your answer.

Make sure there aren't any bubbles clinging to your crown or it'll throw off your measurements.

The number of bags of rocks in 12.25 cubic feet will depend on the size and weight of the bags. To determine the number of bags, divide the total volume of rocks (12.25 cubic feet) by the volume of each bag.

84 grams = 2.96 ounces.

A 4.7 liter engine typically equates to a 287 cubic inch engine.

The number of gallons of water that one chlorine tablet can treat varies depending on the tablet's concentration and the amount of water being treated. However, typically one chlorine tablet can treat around 500 gallons of water. It is important to carefully follow the instructions on the product packaging for accurate dosing.

Multiply litre by 10

There are 5,376 liquid ounces of crude oil in one barrel.

10 cubic meters = 2641.7 US liquid gallons