Volume

1 gallon is equal to 4 quarts, so 34 quarts would be equivalent to 8.5 gallons.

That's going to depend on . . .

-- the starting temperature of the water

-- the target temperature of the water

-- how fast you want it to get there

-- the efficiency of the heater you use

1 litre = 1000 ml (of any substance) 750 ml = 3/4 litre (three quarters of a litre)

One cubic foot is 1728 cubic inches, so 27648 cubic inches equals 16 cubic feet.

59.174539478075 shots are present in 1.75 liter.

Around 8.460003 teaspoons are available in 1.41 ounces.

0.135 US fluid ounces is about 4 mL (3.992 mL).

A 2012 Honda Fit has a fuel tank capacity of around 10.6 gallons.

20 US gallons is about 75.7082 liters.

20 Imperial gallons is about 90.9218 liters.

That is 1 quart.

There are 16 cups in a gallon, so 450 gallons of water is equal to 450 * 16 = 7200 cups of water. To find out how many cups are released per second, divide by the number of seconds in an hour (3600 seconds): 7200 cups / 3600 seconds = 2 cups of water released per second.

2 qts = 4 pints

1 quart = 2 pints

1 pint = 0.5 pint

There are 8 fluid ounces in one cup and four cups in one quart. Therefore, there are 32 ounces in one quart.

84.53 pints

1 liter = 2.11 pints

1 pint = 0.47 liter

1 cup and 7 1/2 ounces. That is 1/2 ounce short of two cups.

Be careful that you are converting fluid ounces to cups. I tried to figure out how many 1/2 cup servings were in a 15.5 ounce can of beans. Unfortunately the 15.5 ounces is by weight, and the 1/2 cup is by volume.

In this case, the servings were also listed as 130g. So, to find the number of servings I divided 15.5 ounces (weight) by 130g to get 3.4 servings.

54 cubic feet is equal to 2.07 cubic yards.

29 inches by 15 inches = 435 square inches = 435/144 square feet = 3.02 square feet. Multiplying the number of square feet by a 3rd dimension (thickness or depth, etc.) will give an answer in cubic feet. If the 29 inches by 15 inches object is 1 inch thick, it has a volume of approximately 0.252 cubic feet (3.02/12).

To convert tenths of ounces to whole ounces, you simply divide the number of tenths by 10. For example, if you have 5 tenths of an ounce, you would divide 5 by 10 to get 0.5 ounces. This represents half of a whole ounce.

42.7 litre is 42,700 mls.

The mass and weight of a gallon of sea water depend upon the temperature

and salt concentration in the sea water.

Assume T = 60.0 F and C sub salt = 4.0 mass percent

d = ( 64.0 lbm / ft^3 ) ( 1.0 ft^3 / 7.4805 gal ) = 8.56 lbm / gal

m = ( d ) ( V )

m = ( 8.56 lbm / gal ) ( 1.0 gal ) = 8.56 lbm <-----

31.5 gallons are 119.2401 liters. (31.5 US gal = 119.2401 l)

1000 cm^3 = 1 litre so 262500 cm^3 = 262500/1000 = 262.5 litres.