Volume

1 oz = 28.3495 g

1 oz = 28.3495 g

1 oz = 28.3495 g

1 oz = 28.3495 g

1 oz = 28.3495 g

1 oz = 28.3495 g

473.17 ml

1 quart = 946.35 milliliters

1 milliliter = 0.001 quart

convert first the gallons into milliliter which is 1gal=30ml. then convert milliliter to Liter which is 1000ml=1L.

ex. 100 gallons = __________ L

100 gallons x 30 milliliter per 1 gallons = 3000 mL

3000 mL / 1000 mL per 1 Liter = 3 Liter

Ans: 3 Liters Not quite, but nice try. There are 379 (+,-) liters per 100 gallons. 1 Liter = 0.26417205236 Gallon A liter is more akin to a quart.

60 mL is about 2.028 US fluid ounces.

The cubic feet of space in a dog kennel would depend on the dimensions of the kennel. To calculate the volume in cubic feet, you would need to measure the length, width, and height of the kennel, and then multiply these dimensions together. For example, a kennel that is 3 feet long, 2 feet wide, and 4 feet high would have a volume of 24 cubic feet (3 x 2 x 4 = 24).

No. Porosity is defined as the measure of the storage capacity of a rock. it is the ability of holding a fluid. Its formula is defined as Pore Volume / Bulk Volume. If you take the units, m^3 / m^3 (metric), there is no unit at all. It is just a percentage or a ratio... Hope that answers your question

To convert cubic feet to liters, you would typically multiply the volume in cubic feet by 28.3168. Therefore, a volume of 6 x 4 x 4 cubic feet would be equal to 384 cubic feet. Multiplying 384 by 28.3168 gives you approximately 10,872.21 liters.

That is 5,500 ml

Four quarts per gallon.

20 ounces is 1/8th of a gallon. There are 128 ounces in one gallon, so it is just over 20% at 27/128.

Volume is a cubic linear measurement the SI unit for linear measures is the meter. The SI volume unit is the cubic meter but liter is accepted (one micro m3) for smaller volumes ml (milli liter) = cm3 (cubic centimeter)

12.5 US gallons = 47.3176473 liters

47,000 L = 12,400 US gallons or 10,300 UK gallons.

Approximately 78% of the air is nitrogen, so if you have 2 liters of oxygen, it would suggest you have around 78% of nitrogen, which would be about 5.5 liters (calculated as 2 / 0.22 = 9.09 liters of air in total, 78% of that is nitrogen).

ANSWER 1 mL = 0.034 US ounce 1 mL = 0.035 UK ounce for faster calculations you can use online cooking measurement converter http://www.ghostcalc.com/cooking-measurement-converter.html

You are comparing 2 different things: Weight and Volume. So you question cannot be answered, unless you tell me what substance you are working with.

To convert cubic feet per hour to liters per minute, you can use the conversion factor: 1 cubic foot = 28.3168 liters and 1 hour = 60 minutes. So, you can multiply the cubic feet per hour value by 28.3168/60 to get liters per minute.

One gallon is equivalent to approximately 3.785 liters.

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Liters are three places to the left of milliliters. So you have to move the decimal place three times to the left. You will get 2.3 L = 2,300 mL.

72 points (pt) is a unit of measurement commonly used in typography to indicate font size. It does not translate directly into gallons, as gallons are used for measuring volume. To convert 72 pt to gallons, you would need additional information related to the context of the measurement, such as the size of the container or object being measured.

You would typically use fluid ounces (oz) or cups (c) to measure the volume of a mayo jar in customary units.

There are approximately 13.2 gallons of lager in a 50-liter keg.

250ml is less than 250l

Because ml is mili liter that is less

Fill the 7 beaker and pore contents into 10 beaker.

Mark where the contents come up to on the 10 beaker.

Fill the 10 beaker up and pour off the top of it into the 7 beaker until you are down to the mark.

You will now have 3 litres in the 7 beaker. Mark where it comes up to.

Empty the 10 beaker.

Pour the 3 litres in the 7 litre beaker into the 10 litre beaker.

Fill the 7 litre beaker up to the 3 litre mark and pore it into the 10 twice more.

You now have 3*3=9 litres in the 10 litre beaker.

QED.