0
Volume
Questions about the various units and conversions of volume. This category is also home to questions which ask the volume of certain objects given length, width, and height.
26,790 Questions
5 ounces is equivalent to approximately 147.87 cc (cubic centimeters).
There are 453.59237 grams in one pound. Therefore to get amount of grams in pounds, value in pounds has to be multiplied by amount of grams in one pound:
2.5 pounds = [pounds] * 453.59237 = 2.5 * 453.59237 = 1133.9809 grams
2.5 lbs = 1 133.980925 grams on earth. http://www.onlineconversion.com/weight_all.htm
How many milliliters are needed to get 2 liters if you have 1400 milliliters?
1 liter = 1000 ml.
2 liters = 2000 ml.
2000 ml - 1400 ml = 600 ml
You need 600 more milliliters to get 2 liters from 1400 ml.
Roughly 1 2/3 cups.
The actual number is 13.25oz./ 8oz. per cup = 1.65625 cups. But if you don't round that, then good luck measuring it out. XD
There are 36,000 cfh (cubic feet per hour) in 36 mbh (thousand British thermal units per hour).
What is the weight of southern yellow pine in pounds per cubic foot?
Machinery's Handbook lists the density of southern yellow pine at from 52~55 pounds per cubic foot green and 36~41 pounds per cubic foot air dried.
You might have guessed that the weight of a chunk of wood will vary a bit depending on its moisture content. (Resin content will affect density as well.) Was it just sawed, or did it just come out of the kiln? Southern yellow pine can weigh 23 to 37 poundsper cubic foot out of the wood storage shed, according to the chart in the Engineering ToolBox. Though that might seem a bit low given other estimates, you can use the link below to educate yourself.
If you consult Reade Advanced Materials, they say 45 pounds per cubic foot dry. The Wooden Boat Forum says 43 pounds per cubic foot. The sum of these citations might yield confusion, but a good estimate of a bit over 40 pounds per cubic foot is "safe" and quite usable/useful.
What is the weight of 1 cubic foot of aluminum?
The weight of 1 cubic foot of aluminum is approximately 168.5 pounds.
What is the volume of 20mm x 150mm test tube?
To calculate the volume of a test tube, you need to use the formula for the volume of a cylinder: V = πr^2h. Given the dimensions of the test tube (diameter = 20mm and height = 150mm), first, you need to convert the diameter to radius by dividing by 2 (r = 10mm), then plug the values into the formula to find the volume.
How many cenilitres in a millilitres?
1ml = 1.000027cc. The difference is so slight that they are usually considered to be equal.
How many milliliters are in a cleansing enema?
For a warm water or soapsuds enema, 500cc to 1500cc is the usual volume given to an adult. Sodium Phosphate enemas (like Fleet) and other mini-enemas such as a bisacodly enema contain very little fluid and work by stimulating the colon muscles. These are usually 30cc to 120cc.
One- fourth fluid ounces is how many milliliter?
One-fourth fluid ounce is equivalent to approximately 7.4 milliliters.
Formula for converting cubic inches into cubic meters?
To convert cubic inches to cubic meters, you can use the following formula:
cubic meters = (cubic inches) / 61023.744
Simply divide the number of cubic inches by 61023.744 to get the equivalent in cubic meters.
How can you determine pure silver if you know its volume and mass?
The density of pure silver is 10.5 grams per cubic centimeter. If you have the exact volume of the coin in CCs, you can calculate the weight that it would be were it pure silver. If it differs substantially from the calculated value, it is an alloy.
How many quarts equals twelve gallons?
One gallon is equal to 4 quarts. Therefore, 12 gallons is equal to 48 quarts.
Mercury is greyish white. In fact Copper and Gold are the only metals that are not white/grey.
Which of these would be best to measure 12.6 mL of liquid ethanol?
You need a simple (class A or B) graduated pipet.
None, since there can be no conversion.
A millimetre is a measure of length in 1-dimensional space while a litre is a measure of volume in 3-dimensional space. The two measure different characteristics and, according to the most basic principles of dimensional analysis, any attempt at comparisons or conversions between the two are fundamentally flawed.
