Volume

64 fluid ounces in 1/2 gallon.

1 US fluid ounce = 0.0295735296 liters
1/33

There are 6 tablespoons in 3 ounces.

1 liter contains about 2.82 12-ounce measures.

It's one ounce.

Sorry, but obviously nobody knows but baby if you wanna know you should google it. P.S. Remember read the descriptions! ;D $e%y! Your Welcome, and enjoy my answer. (:D

Who wrote this answer? People do know so you should stfu

There are approximately 38.5526 liquid ounces in 1.14 liters.

If you have to dig a hole 270 feet wide by 470 feet long to a depth of 15 feet, you've got a lot of digging to do. The volume is a simple product, so 270 x 470 x 15 = 1,903,500 cubic feet. Since there are 27 cubic feet to the cubic yard, you've got 70,500 cubic yards of dirt to move! If your trucks carry 12 yards, that's 5,875 loads. That's a lotta fill!,

4 quarts to a gallon.

5000/4 = 1250 gallons

There are 1.67 liters of water in the basin, as 1 liter is equal to 1000 milliliters.

When you multiply 16 x 8.02 it equals 128.32, which has 5 significant figures. When you divide 28.58 into 128.32 it gives you 0.223 mL and it needs to be rounded to four significant figures.

There are 128 fluid ounces in 1 gallon.

A cubic foot measures 12" x 12" x 12", so it contains 1728 cubic inches. Therefore, half a cubic foot is 1728/2, or 864 cubic inches. But the implication of the original question is PROBABLY meant to be -- what are the dimensions of a cube if its volume is one-half of a cubic foot? The exact answer, expressed in inches, is: (the cube root of 864) x (the cube root of 864) x (the cube root of 864); or, for practical purposes, just a little larger than 9.5" x 9.5" x 9.5".

There are 0.304326 oz. in 9 mL.

Let's try it in REAL units!!

Volume equals length times cross section (pi x radius squared).

(lets do it in cm, as that will give us an answer in ml)

So for a 10cm diameter pipe, 1m long that's:

100cm x 3.142 x 5cm squared

=7855 cubic centimetres. Now 1000 CC = 1 litre (gotta love metric!). so one metre of 100mm pipe will hold 7.855 litres of whatever!

To find the volume of water in a pipe you need to know the diameter and the length of the pipe. The formula is pi x radius squared x the length in feet x 12 to get cubic inches didvide by 277.42 ( cubic inches in an imperial gallon ) = gallons in the pipe.

For example 4 inch diameter pipe 10 feet long holds 5.43 gallons of water.

3.14 x ( 2 x 2 ) x 10 x 12 = 1507.2 cubic inches / 277.42 = 5.43 gallons

1 liter = 0.001 kiloliters and 1 kiloliter = 1000 liters.

The volume in US quarts is about 0.611.

The volume cannot be calculated from an area measurement (42 cm squared) because volume is a measure of cubic units (cm^3). To calculate volume, you would need a third dimension such as height or depth.

The volume of a kilogram of water is approximately 1 liter. This is because the density of water is close to 1 gram per cubic centimeter. Since there are 1000 grams in a kilogram, the volume of a kilogram of water is about 1000 cubic centimeters, which is equivalent to 1 liter.

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Milliliters are three places to the right of liters. So you have to move the decimal place three times to the right. You will get .4 L = 400 mL.

1 US quart = 32 US fluid ounces

128 oz

1 quart = 32 oz

1 oz = 0.03 qt

1 Imp. qt = 40 oz

There are approximately 1.27 cups in 300 milliliters.