Volume

Cooking an 8-ounce raw steak will reduce the weight to about 6-7 ounces after it has been cooked. The amount of weight loss is due to moisture evaporation during the cooking process.

None, since there can be no conversion. A kilogram is a measure of mass. A millilitre is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid. The masses of equal volumes of the two substances will clearly be very different. So there is no direct conversion between mass and volume: you need to know the density of the substance to enable you to carry out the conversion.

3.8 cups of dry, shelled pecans weigh about a pound. In volume measure, one gallon would be about 16 cups. Therefore, one gallon of shelled pecans would weigh approximately 4.2 pounds.

A bucket with a flat bottom that is 40' x 40' and that has one inch of water in it would have 40' x 40' x 1/12' cubic feet of water in it. That's 133 1/3 cubic feet of water. There are 7.48 gallons in a cubic foot, so there would be 997 1/3 gallons of water in this bucket. On the off chance the bucket was 40" x 40" instead of 40' x 40', the math machine cranks out an answer of 6.93 gallons of water.

1 US gallon equals 4 quarts.
So 68 quarts equals 17 gallons.

8 ounces of ground chuck is equal to 0.5 pounds. This is because there are 16 ounces in a pound, so half of that is 8 ounces.

The weight of a cubic foot of stainless steel is around 494 pounds.

weigh the drum empty then full of water and the difference is what it will float. i think there's about 4 litres to a gallon so it should flaot about 200kg which is about 400 lbs (near enough)

There are 10 millitres in a centilitre, the sameway as there are 10 millimetres in a centimente.:)

1 ml / 0.08 ml = 12 doses, with a half dose left over.

Well lets take what we know:

10-6 L (0.000001 L) = 1 microliter

So lets convert:

4 L x (1 microliter/10-6 L) = 4x106 microliters (4,000,000 microliter)

There are 30 ml in 1 ounce. So there are 1.5 ounces in 45 ml.

how big is the barrel.....

Standard barrel is 55 gallons. If you are asking how many gallons from a barrel of crude-restate.

3.15 qts

1 quart = 32 oz

1 oz = 0.03 qt

1 Imp. qt = 40 oz

There are 8 fluid ounces per cup, so 1 ounce is an eighth of a cup. If you don't have an eighth of a cup measure, there are sixteen (16) tablespoons per cup, so an eighth of that means two tablespoons. If you can't find your tablespoon, there are three teaspoons per tablespoon, so there are six (6) teaspoons per liquid ounce.

You must mean fluid ounces (ounces are weights, fluid ounces are volumes). There are 80 fluid ounces in a UK half gallon. There are 63.999999 US fluid ounces in a US half gallon.

The SI unit of area is the square meter (m2), which is a derived unit.

1 dry pint is 550ml, so just over 1/2 liter.

A cubic mile is a unit of volume that represents the amount of space occupied by a cube with sides that are each 1 mile in length. It is equal to approximately 4.17 billion cubic meters or 147.2 billion cubic feet.

3.25 l

Algebraic Steps / Dimensional Analysis Formula 3,250 ml*1 l

1000 ml=3.25 l

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Liters are three places to the right of kiloliters. So you have to move the decimal place three times to the right. You will get 645 kL = 645,000 L.

1 liter = 1.05668821 US Liq qt

another way:

1 qt US Liq = 0.946352 L or another way

There are 1,000 microliters (uL) in 1 cubic millimeter (mm3).

One US gallon.

1 mL - A cc (cubic centimeter) and a mL (milliliter) are equal to each other in terms of volume.