Wind Power

A motor can be used in the generation of electricity by acting in reverse as a generator. When a motor is turned by an external force (such as wind or flowing water), it generates electrical energy through the principle of electromagnetic induction. This process converts mechanical energy into electrical energy that can be stored or used to power devices.

Some types of power that do not use a turbine to generate electricity include solar power, which converts sunlight into electricity through photovoltaic cells, and fuel cells, which produce electricity through a chemical reaction. Other examples include thermoelectric power, where temperature differences generate electric current, and piezoelectric power, where mechanical stress creates an electric charge.

It was developed and used in the U.S. i believe.

I suggest wind power was first used hundreds of years before the US was thought of! But this was for mechanical use, raising water and grinding corn.

they are just guessing!

a windmill is used for this purpose. the wind makes the mill go around wich turns the mechanism that makes the electricity. in the related links box below I posted the wikipedia windmill article.

A generator converts mechanical energy into electrical energy. By utilizing a magnet and a conductor to induce a flow of electrons, the mechanical energy is transformed into a usable electrical current.

In general, wind energy tends to be cheaper than solar energy to produce on a per-kilowatt basis. However, the cost can vary depending on factors like location, local incentives, and project size. Both wind and solar are valuable renewable energy sources that can help reduce greenhouse gas emissions and combat climate change.

The negative of wind energy is that production is dependant on winds, therefore if there is no wind there is no energy. there are no recorded ecological effects of wind energy capturing structures.

Some negatives of wind energy include its intermittency, meaning that it relies on wind currents which are not always consistent. Wind turbines can also have negative impacts on wildlife and require a significant amount of land to operate efficiently. Additionally, some people may find the noise and aesthetic impact of wind turbines to be a downside.

Wind power like any power has no good or bad. It is what it is. It is an engineering problem to interface wind power to the demand for power.

Pollution controls are not needed as part of the interface but load smoothing is part of the interface. noise abatement might be part of the interface, transmission to consumption centers may be part of the interface. Good and Bad arenot the issue, interfaces are.

The short and simple answer is this: A wind turbine consists of blades; similar to those of a helicoptor. These blades are attached to a generator. As wind causes the blades to move, the blades turn the generator to produce electricity. As to how a generator works; I'll have to leave that up to someone else to explain.

Wind power is found around the world in regions with consistent wind patterns, such as coastlines, plains, and mountain passes. Countries with significant wind power capacity include China, the United States, Germany, and India. Wind farms are often located in areas that experience strong and consistent winds to maximize energy generation.

Wind turbines convert the kinetic energy from the wind into mechanical energy, which is then used to drive a generator that produces electricity. The spinning blades of the turbine capture the wind's energy and turn a rotor connected to the generator, converting the rotational energy into electrical energy. This electricity can then be fed into the power grid for use.

Wind turbines use rotating blades to capture the kinetic energy of the wind and convert it into mechanical energy. This mechanical energy turns a generator, which produces electricity by converting the mechanical energy into electrical energy through electromagnetic induction. The electricity generated is then fed into the power grid for distribution.

In the past, wind energy has been used for centuries for tasks such as milling grain, pumping water, and powering sailboats. Windmills were commonly used to harness wind power for mechanical tasks before modern wind turbines were developed for electricity generation.

Wind energy accounts for around 5% of the world's total energy production.

Wind energy is harnessed by placing turbines in areas with strong, consistent wind. When the wind blows, it causes the turbine blades to spin, turning a generator that produces electricity. This electricity is then transmitted through power lines for use in homes and businesses.

Wind energy is captured through wind turbines, which have large blades that spin when wind blows. The spinning motion of the blades turns a generator, producing electricity. The generated electricity is then fed into the electrical grid for distribution to homes and businesses.

MW stands for megawatt and is a unit used to measure the power output of wind energy systems. It represents the amount of electricity that a wind turbine can generate at a given moment.

Solar energy is not available when the day is cloudy.Wind energy is not available when wind is not blowing.

A windmill turns because of the force of the wind pushing against its blades. This force causes the blades to rotate, which in turn powers machinery or generates electricity. Windmills have been used for centuries to harness wind power for various purposes.

Wind power works best in areas with high and consistent wind speeds, such as coastal regions, plains, and mountain passes. These locations provide the necessary conditions for efficient harnessing of wind energy. Areas with large open spaces and minimal obstructions are also ideal for wind power generation.

They are both an alternate energy and they both helping the environment.

Neither source provides any real power and the cost of energy used to create the devices is never given back (net result is less then green... more power to make then ever is produced). Fossil fuel plants must be ran behind both systems to provide power during lulls in sun or wind. Both produce roughly 10% of what they claim to create. Wind is different in that it kills birds and bats.

Both are insanely bad ideas from an environmental standpoint.

The distance a gust of wind can blow varies depending on factors such as wind speed, direction, and duration. Strong gusts from severe weather events like tornadoes or hurricanes can travel long distances, while typical gusts in everyday weather may only reach a few hundred feet.

No, it's not recommended to keep a magnet near tapes as it can erase the data on them due to its magnetic field. It's best to store the tapes in a separate location away from magnets to prevent any potential damage.