0
How do you disconnect the transmission lines to the radiator of a 1996 Dodge ram pick up?
If you are talking about the quick disconnect style of fittings (no threaded connections) the fitting is removed by pushing on a circular ring around the tube at the fitting connection. You can buy a special plastic ring release tool from Harbor Freight or most auto part stores fairly cheap. The ring tool snaps around the metal transmission line, then slides up to connector fitting. By pushing on the fitting release ring, you are releasing the tension of the spring fingers on the ring, allowing the fitting to be pulled apart. It can be tricky, you may have to push the fitting together to allow the spring fingers to "un-bite" the connection while you are pushing the release ring at the same time. Once it releases, it comes apart so easy, you wonder why it looks so difficult to remove. Go check out a Plumbing section at Home Depot and look at the "Sharkbite" style quick fittings--they are the same design and disconnect using the same principal.
What else can I help you with?
How can you replace the lines that carry transmission fluid to the transmission?
if you are asking about the cooling lines for the transmission that connect to the radiator, its easy. first disconnect the lines from the radiator (2 lines, usually on the bottom opposite the radiator outlet) then disconnect the lines from the transmission. remove the brackets holding them on, then remove.
What is the cooling side of the transmission on a 1996 dodge Dakota radiator?
there are two metal looking lines that screw into the radiator that is the cooling side
How do you replace a 2006 Dodge Grand Caravan radiator?
To replace the radiator in a 2006 Dodge Grand Caravan, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant by removing the radiator drain plug and disconnect the upper and lower radiator hoses, along with any transmission cooler lines. Remove the mounting bolts and support brackets, then lift the old radiator out. Install the new radiator by reversing the process, ensuring all connections are secure, and refill the coolant before starting the engine.
How do you remove the radiator on a 2000 Dodge Intrepid?
remove the metal plate that covers the radiator, if you ever change a headlight blub, you already know which plate im speaking of... afterwards after disconnecting hoses transmission a/c lines just pull upwards, oh and disconnect plug to cooling fans it all comes out together ( fans, radiator, transmission cooler)
How do you change a radiator for 1996 Geo prism?
Drain the old one, disconnect the transmission lines, undo the radiator hoses and bolts holding it in an pull it straight up.
How do you remove the radiator from a 96 Toyota Corolla?
Remove fan shroud Drain radiator Disconnect upper and lower hoses Disconnect transmission lines if Auto Remove securing bolt at top and side Radiator should lift from lower supports
How do you remove transmission lines from radiator on a 2000 ford windstar van?
To remove the transmission lines from the radiator on a 2000 Ford Windstar, first, ensure the engine is cool and disconnect the negative battery cable. Then, locate the transmission cooler lines on the radiator, use a line wrench to carefully loosen and disconnect them, being prepared for any fluid leakage. You may want to have a drain pan handy to catch any transmission fluid that escapes during the process. Finally, after removing the lines, check for any debris and clean the connection points before installing new lines if necessary.
How do you disconnect the automatic transmission cooler lines on a 2005 dodge caravan?
There is a special tool that releases the wire clips that hold them on.
How do you know if a radiator has a auxiliary transmission oil cooler on it?
If there are lines coming from the transmission to the radiator, it has a cooler in the radiator. If there are lines from the transmission to an external heat exchanger, that would be an auxiliary cooler.
How do you remove a radiator from a 1991 Jeep Cherokee?
Drain cooling system Remove fan shroud Disconnect transmission lines Disconnect upper and lower hoses Remove bolts at top & side of radiator Lift out of lower supports
How do you change the radiator on a 2004 Dodge Ram 1500?
To change the radiator on a 2004 Dodge Ram 1500, first, ensure the engine is cool, then disconnect the negative battery cable. Drain the coolant by removing the drain plug or lower radiator hose, and disconnect all necessary hoses and the transmission cooler lines. Remove the mounting bolts and lift out the old radiator, then install the new one by reversing the process, ensuring all connections are secure and refilling the coolant. Finally, check for leaks and reconnect the battery.
How do you replace 2009 Dodge Journey radiator?
To replace the radiator on a 2009 Dodge Journey, start by draining the coolant and removing any necessary components, such as the front grille and electric fans, for better access. Disconnect the upper and lower radiator hoses, as well as the transmission cooler lines if applicable. Remove the mounting bolts securing the radiator, lift it out, and install the new radiator by reversing the steps. Finally, refill the coolant and check for leaks after starting the engine.
