0
By the liner bulging, I assume you are refering to water behind the liner due to excessive hydrostatic pressure. To correct, you need to remove the excess water. You need a pump and a length of smooth flexible hose, spa flex is best. 1. Unhook the liner from the bead receptor in shallow end of pool 2. Place hose into the water behind the liner (towards the bottom of the pool wall) 3. attach hose to front of the pump 4. Attach another hose to the discharge side of the pump 5. start pump and send discharged water back into the pool. 6.use a pool brush to carefully smooth the liner back into place. 7. When water recedes slowly pull suction hose from behind the liner. Note:You do not want to remove all the water just the majority of it. Otherwise it will be difficult to remove the hose. The remainder of the water behind the liner will disipate as the ground dries and the liner watyer pressure pushes it out..
What else can I help you with?
What is the best lining to use if doing your own pool installation?
I would suggest using a vinyl pool lining if you are doing the installation yourself. Vinyl is a very asy material too work with and you wont need special tools.
What type of concrete is used to fix a concrete inground pool?
I have etching in my inground concrette pool and i need to know how to fix it. the pool was made in 1973 i bought the house three years ago.
How do you fix a pool that is not level?
You learn to live with it.
How do you fix a pool waterfall?
Call a plumber
How do you get DE powder out of the pool water?
Firstly you find out how the DE got into the pool - must be a broken filter pad. Fix that, then vacuum the pool. No point vacuuming before you fix the filter problem, or the DE will finsih up back in the pool.
Can dogs put a hole in the deep end in the vinyl lining of an inground pool?
It is highly unlikely.
My above ground pool is uneven fix it with out draining it.?
I have a 15' above ground pool, when we installed the pool it was a little uneven (not even 1") now that the pool has been up for a while it has settled and now the side that was lower is off by about 3-4". How can I fix this without draining the whole pool?
How to build a pool using bricks?
A pool can be build using bricks by digging out a large, pool-shaped hole and lining it with bricks. This provides a secure base which can then be covered with a vinyl liner and then filled with water.
How do you remove a stone under the lining of an above ground pool?
To remove a stone under the lining of an above-ground pool, first, drain the water from the pool to below the level of the stone. Carefully lift the pool liner at the affected area to expose the stone, taking care not to damage the liner. Remove the stone and any debris, then reposition the liner, ensuring there are no wrinkles or folds. Finally, refill the pool with water and check for leaks or issues with the liner.
How do you fix in ground pool leaks?
use Jose ortiz
If water is dark and murky must you drain the pool to fix it?
no
What kind of products are sold by Rhino Lining?
Rhino Lining sells linings for truck beds. Some of the linings the company sells have to be installed, others may be sprayed on. The linings are be inexpensive or not depending on the size of the liner and the materials it is made of.
