Install a small saltwater chlorinator into the filtration Plumbing wire up the electronics to run it choose what kind of salt you wish to use add it and you are done. The choices in salt are Either the normal Sodium chloride. Or you if you can get it I would recommend using Magnesium and potassium chloride that is only just coming onto the market in Europe and Australia.
nirates
Put it together read instructions.
Although ordering the spa as a "salt water" hot tub when you buy it is easier, as there is some plumbing work required, you can retrofit either a bromine salt generator or chlorine salt generator and create your own "salt water spa".There is a misnomer about salt water hot tubs in that you still have to create the chemical chlorine or bromine in order to sanitize the water. Only with a salt generator this process happens automatically, but you must establish either a bromine salt reserve or a chlorine salt reserve depending on the system you are using.You will save the trip to the store for chlorine or bromine, but you still need to add the salt when you refill the spa or when you top up the water.To convert, the bromine salt cell is plumbed into the water line and the control unit is mounted to the spa. A hot tub tech can do this for you. Sometimes you may save by already having the salt generator and just having someone hook it up and add it to the plumbing.There is no switching. But you do have to install a chlorine generator. The generator makes the chlorine from the salt you add. But why go through all the hassles and expense?A better bet would be to use Bromine, it was developed for use in hot tubs. Besides at high temps. chlorine will vent off in a gas form and probably run you off.
you find out were the water is coming from after you fill it up with water.
salt and water
It is possible to get straight hair from a hair spa. You will just need to set up an appointment and follow all their instructions.
No, salt does not soak up water. Instead, it dissolves in water, forming a solution.
Evaporate the water. Salt is left behind when the water dries up.
Follow the plasterer's or builder's explicit instructions. k
Because the salt in the water builds up at the top. But in regular water, it has nothing in it to build up...
To use a foot spa massage machine, first fill it up to the maximum water level line with warm water. Plug the unit into an electrical outlet, choose which setting you want and place your feet in the foot spa.
Adding water to salt crystals causes them to dissolve as the water molecules interact with the ions in the salt crystals, breaking the crystal lattice structure. This causes the salt crystals to break up and disperse evenly in the water.