A chlorine generator, also known as a salt generator, is an addition to a pool pump and filter system that converts salt to chlorine. It is another method of adding chlorine to a swimming pool. You will still need a filter, like sand, to filter dirt and debris from the swimming pool.
Need to rephrase question.
Add water and stirr: salt is soluble, sand not. Filter the solution. On the filter re- main sand, in the solution salt. After repetitive evaporations you can obtain salt as crystals.
Salt is soluble in water, sand is not soluble; filter the solution.
1. Put the mixture in water and stir. 2. Salt is water soluble, sand not. 3. Filter the suspension: sand remain on the filter and the salt in solution.
Put the mixture in water and stir. After the dissolution of salt filter the solution; sand remain on the filter, salt pass in the solution.
Salt is soluble in water; after filtration sand remain on the filter.
1. Put this mixture in water and stir. 2. Filter the suspension on paper filter or other type of filter. 3. The sand remain on the filter and the salt in the filtrate.
Add water and warm to dissolve the salt. Filter the whole solution to leave the sand. Rinse the sand and filter again. Evaporate the water off the salt solution.
You can separate salt and sand from water by performing a simple filtration. First, pour the salt and sand mixture through a filter paper to trap the solid particles. Then, evaporate the water from the filtrate to recover the dissolved salt, leaving the sand behind.
Sand and salt can be separated using filter paper and a funnel because salt dissolves in water, while sand does not. When the mixture is added to water and stirred, the salt will dissolve, leaving the sand behind. By pouring the mixture through filter paper in a funnel, the sand is trapped on the paper while the salt solution passes through, allowing for the separation of the two components.
Water and a filter would work. Pour the salt/sand into water and the salt will dissolve. Pour the mixture into a filter and the sand will be trapped in the filter. Evaporate the water and the salt will remain.
1. Filtering the liquid sand remain on the filter. 2. The solution containing salt pass the filter; after the evaporation of water crystallized NaCl is obtained.