its most likely your belt. its loose and when you start up your car it burns on the pullies. the only way to fix that would be to put a new belt it just got old. but that's the smell your smelling.
Loosen the tensioner pulley. Slide the tensioner pulley to the right. The serpentine belt will come loose. Remove the serpentine belt. Reverse the process to install the new serpentine belt.
Loosen the tensioner pulley. Pushed the tensioner pulley to the left. The serpentine belt will come loose. Remove the belt. Reverse the process to install the new serpentine belt.
belt tension er spring
Loosen the tensioner pulley on your 1988 Chevrolet Corsica. When the tensioner pulley is loose the serpentine belt will easily come off. Put the new serpentine belt on and tighten the tensioner pulley.
Removing the serpentine belt on a Pontiac Aztek requires loosening the adjustment pulley. Once the pulley is loose the serpentine will have enough slack to come off.
Many things can cause a serpentine belt to come off. Most likely, it slipped off, or the tensonier that holds it in place was not tight enough.
Loosen the tensioner pulley. Slide the tensioner pulley to the right. The serpentine belt will come loose and can be removed. Reverse the process to install the new belt.
The belt need to be replace to a new oneor check the tention of the belt.
You probably have a bad serpentine belt and tensioner.
Several things could cause this such as belt not being tight enough in the first place, or the belt isn't aligned properly, making the water act as lubrication slipping the belt off.
Possibly, if the alternator is driven by that belt and it is setting a voltage code.
the head will need to come off, thread the belt through and, and tilt the head so that you can slide the belt on