I wouldn't advance it too much if not at all if you haven't replaced the cam with a performance one, and even then, not much at all. If you advance it too much, you will have problems starting it and it will flutter at high rpm
With the car running at idle, advance your distributor. Adjust the idle screw down take the car for a ride. If everything functions like you want and the motor runs good your good. If you advanced too far you will get a spark knock. This can cause serious damage if driven long this way. Go back home retard the timing and take for another ride. Keep repeating until you get the response you want and spark knock goes away
4, to 6, degrees advanced, or BTDC.
how do you set timing on a 1985 350 gmc truck
how do you set the timing for a 1997 Chevy 350 5.7 engine
how do i set the timing for a chevy 350 small block?
In order to set the timing on a 98 Chevy 350 vortex, you have to time with a scan tool that will let you set timing. Or let garage do it
If it is advanced to far, It will be hard to start when engine is hot and when it is running it will ping and rattle and could even burn a piston. The timing on that year should be set at ZERO at top dead center.
There is a big difference in how timing is set. We need to know what year.
how do i check the timing on my 02 honda 350 atv
you can purchase an aftermarket timing tab which bolts to the timing cover.
How do u set the timing on a 1972 buick skylark
trying to set base timing on a 97 Chevy c1500 with a 5.7 engine the wire to disconnect to set base timing is ?
The timing is electronic controlled. You MUST have an OBDII engine scanner to set the timing to specs. Timing light will not work.