How do you Change oil on a 2002 ford F-150 4x4?

Answer 1

-Buy 6 quarts of 5W-20 motor oil and an oil filter -Using a drain pan placed underneath the oil pan, remove the drain plug using a wrench (use a crescent because sometimes socket wrenches can get stuck), the drain plug faces towards the passenger side - Let the oil drain into the pan completely, it is best to let the engine warm a little bit so the oil is less thick and drains easier, be careful though cause it gets hot -Once all the oil is drained, replace the drain plug and move the pan further up towards the front. There is a black plastic channel under the oil filter that channels the oil out. - Unscrew the oil filter using either a specialized oil filter wrench, or by poking something sharp through the oil filter and using it to torque it and loosen it enough to take off by hand. (This part is a pain because the placement of the oil filter is extremely difficult to get to) - Replace with the new oil filter and hand tighten, being careful not to tighten too much. - Wipe all the old oil off the channel with shop towels - Remove the oil cap under the hood and using a funnel, put 6 quarts of oil in. - After all the oil is in, use the dip stick to make sure you have the proper level then your good to go.