The windshield needs to be folded into the down position to access the wiper motor. There are a couple cut-outs in the metal of the cowl that allows access to the wiper motor & linkage. There are release bolts on either side of the windshield & of course the top needs to be off.
The wiper motor is mounted on the left inside of the windshield frame on the same bracket as the VIN. Fold down the windshield and is fully accessible.
You can try Quadratec.com, Rockauto.com, or your local jeep dealer
The wiper motor should be located on the driver side under the cowl grill below the wiper blade good luck
Yes there is. On the 1987 thru 1995 models the switch is located on the left side of the steering column.Its multi function controling the wiper/washer, turn signal and dimmer switch.
check ground on wiper motor
Yes.
Open the bonnet, remove the scuttle cover, wiper motor, and finally blower motor.
Transmission, yes Motor no, but it would be easier if it was out.
no
The windshield wiper assembly can be removed by unplugging the wiper motor harness, removing the wiper arms and unbolting several bolts that attach the assembly to the firewall. Doing this will give you the room necessary to work on the backside of the engine.
So what is the question about your 1991 Wrangler horn?
There is no 1991 VW Rabbit.