Short, bra tops require a header for the windshield for install. The hard plastic lip goes into the header and the straps on the top will wrap around the roll bar.
If you have a manual transmission, it may need a new plastic bushing at the bottom of the shifter. My 1991 Toyota pickup kept slipping out of gear due to a deteriorated plastic bushing. I picked up a new bushing at the local Toyota parts department for around $11.
Replace plastic bushing.
the pilot bushing is part of the electrical connector on the side of the transmission, Mercedes refers to is as the pilot bushing, don't know why? its not even really a bushing, its a plastic connector with 2 o-ring seals. These leak all the time! Cheap fix though, just need to have it replaced
You can just replace the pin/bushing. I found out too late. Paid 80 dollars for the whole cable and ended up just using the plastic bushing? Go to ATFspeed.com for replacement pin/bushing. 19 dollars
driver side under plastic cowl at base of windshield
wiper motor arm has a small c-clip to remove and then same arm other end has a ball type that you pry off with a small cats paw type bar or screwdriver. this will remove the short wiper motor arm and then you can remove both wiper arms out thru slots in windshield frame. Be sure to remove plastic nuts on both wipers on front side of windshield frame.
Acrylic solvent cement works for most plastics. For windshield repairs on glass take a look at our website and blog at www.dartautoglass.com/windshield-repair.html
If it's plastic it may be damaged.
Whether in home or hospital, plastic tubing connects the oxygen source to the patient.
In Indiana the legal limit on transparent plastic on a windshield is no more than 4 inches. The plastic MUST be transparent, not "foggy" to keep from obstructing the drivers view.
The wiper motor is located under the black plastic cowl below the windshield.