Probably depends on the year/model of the VW. For a 1999 thru 2002 Jetta, you would need to do this. Obtain the unlock code that was shipped with the vehicle. If you don't have the unlock code, your local dealership can pull the radio and look up the code with the serial number. Once you have the unlock code, then turn on the radio. You should see SAFE displayed. After about 3 secs, "0001" should appear. Use the station preset buttons 1 thru 4. Preset 1 changes the first digit of the code, and preset 2 changes the second digit, etc. Enter all 4 digits of the code. After code is entered, press right side of "Seek" button for about 2 seconds, until an audible signal is heard. If you hose up and get the wrong code...will go back to SAFE displayed. You will get another chance to enter the code. After 2 failed attempts, you have to wait 1 hour again for it to unlock. So carefully enter the correct code the first time.
For a 1993 Fox: Turn on the radio. You should see SAFE displayed. Hold MODE and SCAN. After about 3 secs, "0001" should appear. Use the station preset buttons 1 thru 4 to enter your unlock code. Preset 1 changes the first digit of the code, and preset 2 changes the second digit, etc. Enter all 4 digits of the code. After code is entered, hold MODE and SCAN for about 2 seconds, until an audible signal is heard.
Many persons have tried leaving the car on for at least an hour, then turn on the radio and it will reset itself. If that doesnt work, it is best you find a VW dealership and give them you VW serial number and they will find a code for you radio that will be able to make it work.
In order to reset the radio code for VW Beta 3 radio,you will need to know the make and model of the vehicle. You can call your local VW dealer with that information and they can supply you with the necessary code.
on the comand for radio enter your code
How to enter your2003 Acura tl radio unlock code
remove the radio of the car than it will be a # on the radio call your locar vw service dealer to ask for the code.
you will need to leave the radio on for 1 hour so the radio can reset itself then you can re-enter the code.
Hi the answer is yes the radio is coded, you should find the code in your VW handbook . Regards Norman
you have to enter the 4 digit safe code found in your owners manual
Take your car to the vw dealership and they will give will put the code into your radio, however they will most likely charge you $100 dollars for getting the code for you and putting it in the radio. I see about 3-4 cars a day come in for radio codes so once you get that code keep it in a safe place you might need it again. On my 1996 VW Jetta you must hold down the right seek or scan button until the display blanks out. Then you can enter the unlock code.
Email me the code your radio displays and I will return you with the unlock code -- support@totaldream.org
you must enter the 4 digit code found in the owner's manual
Enter the code with the preset buttons on the radio.