Simply pry up the seat cushin. There should be 2 clips holding it down. From there you have to take off th elittle side pice cushion on each side of the rear windows. It should be held on with one bolt on the very bottom.
How do you remove seats in a 2007 Camry SE
Each seat has 4 nuts attaching to the floor. Just remove those nuts. Also do not forget about wires underneath of the seats especially if you have power seats.
You don't have to remove it, but just unclip the rear seats so they could fold down. Gives you more room to work. That's what I did when I did my rear speakers in my 01 civic.
In order to replace the speakers you have to flip down the rear seats and look at the screw ports and remove all the screws to remove the panel covering the speakers. The rest is self explanatory.
I had a very hard time with my back speakers. I had to remove the back seats so I could remove the parcel shelf and speakers. Then I did the same thing in reverse with my new speakers lol. I am NOT looking forward to doing the front speakers/tweeters. Haha Khloe :)
AnswerI had the same problem accessing the rear speakers. Their located under the little windows from the back seats. If you need to remove them its a pain in the butt. But you can still do it. this is what you need to do. 1. remove the flip down seats and unclip the lower seat.2. you will see a screw on the plastic in which the speakers are in and remove it.3. next remove the bar that holds the seat belt in the floor.4 Then you will be able to remove the plastic hiding the speakers that plastic is a whole piece and its a pain taking it off.
Pull the back seats down then take the cover off. Just pull it up and then unscrew the speakers.
The rear speakers in a Toyota solara convertible, you must first remove the existing speakers by removing the cusions from the back of the seats and then accessing the main wire panel to discconect them.
To remove the speakers you have to take out your seats in the back. You have to remove the bottom one first. Then unbolt the seat belts and the bolts by them that will lossen up the back rest part of the seat. then pull the clip to the carpet area that goes up over your speakers. Then pop the clip in the trunk push up on the speakers take out 4 screw and install your new speakers. Put everything back in and bolt bown your seat belts. Not a hard job 30 min. took me with a brake.
The 2011 Toyota Camry has 15.0 cu.ft. of cargo capacity with all of its seats in place.
The 2007 Toyota Camry has 15.0 cu.ft. of cargo capacity with all of its seats in place.
The 2008 Toyota Camry has 15.0 cu.ft. of cargo capacity with all of its seats in place.