you would normally have to pull the inside panel to the door off and then you would have to remove the handle its self. Im not sure if there are salvage places near you that sell used automotive parts put that would be a good place to start to get a new one. or you can jsut bring it to an automotice technition to have a look at it.
The how-to will depend on the year and model. It is also necessary to know whether it is an inside or outside door handle.
The usual reason that a door will not open from the inside on a Nissan truck is because the door handle is broken on the inside. The door panel will have to be removed and the door handle repaired or replaced to open the door from the inside again.
how do i repair theback door handle
You will need to remove the inside door panel of your Chevy truck. Remove the door handle linkage. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
2005 ford escape door handle inside and outside the suv will not open the door
from the inside. take your door panel off and look around in there. the door handle is usually held on with pop rivets that have to be cut off from the inside of the door.
You will have to remove the entire door panel to get at the screws that hold the handle assembly to the panel.
Remove inside door handle and window crank handle, remove inside door panel, remove vent window and channel assembly, remove window.
Best source is LMC trucks.
You will need to remove the inside door panel, by prying outward on the door panel retaining clips. When the door panel is removed the door handle assembly will be visible. Remove the door handle retaining bolts.
Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.
The handle bezel pops out then you can see how it unbolts.