DO you own the vehicle owners manual? This procedure is inside the owners manual. ( page 6-15) But this is the steps (as listed in the owners manual)--- HOW TO RESET THE CHANGE ENGINE OIL MESSAGE 1. with the ignition key in run but the engine off, fully push and release the accelerator pedal slowly three to five times within five second. 2. turn the key to off. (if the CHANGE ENGINE OIL) message comes back on, the engine oil life monitor has not reset - repeat the procedure...
With engine off. Turn key to on. Press accelerator fully three times. This should reset light.
How do I reset the service engine light on a 2003 Chevy Trailblazer?
The easiest way to reset the ABS light in a 1992 Chevy Lumina is to disconnect the battery for about 30 minutes. When it is reconnected, the light should be reset.
How do you reset check engine light for the 2009 Chevy trail blazer?
When you take your car in for an oil change, have the technicians there do the reset for you. (they should automatically do that for you, but you may have to ask them....to make sure they do it) Valvoline does it as part of their service.
Turn the key to the 'on' position (do not start the truck).Wait for the change oil light to come on.Tap the gas pedal 5 times.Move key to off position, move key back to on position. The change oil light should be reset.
Reset the change oil light on Mazda 3
turn the key to the on position engine not running step on gas pedal to the floor three times and wait for light to flash and go out and its reset
Your owners manual should tell you how to reset the light.
how do you reset change the oil light in a 2004 alero?
You can either bring it in to a Chevy dealer or use a programmer/tuner to reset the check engine light.
The service light indicator on a 2004 Chevy Cavalier tells its owners when to send the vehicle in for maintenance. To reset the light, unplug the battery for five seconds.