There is no such thing as a 1998 Chrysler Fifth Avenue
There is no such thing as a 1998 Chrysler Fifth Avenue
You will need both hands to set the clock in the 2007 Chrysler 300. Hold the power button in and adjusts the time with the tuning knob.
Set the clock and radio presets.Set the clock and radio presets.
The abs computer has detected a malfunction and set a code.
turn on the radio on press set then press the power button the hour or minutes will flash turn other knob to adjust when done press (3rd time) clock is set
Turn the radio on and press sel twice for hours and once for mins
To set the clock on a 1988 Chrysler Lebaron you start by pressing the "set" button while the radio is on and push the volume knob in. Once you see the hour number flashing on the screen, adjust by using "seek" and press the volume knob in once you set the hour and then it will go to minutes. Adjust the minutes using the same "seek" button and press the volume knob in and the time will be set.
I have set my 1998 Windstars clock by having the radio on, pushing the clock button down while using scan up and down for hours and minutes. There are likely to be a couple different clock / radio combinations - the Owners Manual for your van will have the steps for each one. See "Related Questions" below for more
To set the analog clock, located at the top center of the instrument panel, press and hold the button (located just to the left of the clock on the silver bezel, at the "nine" o'clock position) in until the setting is correct. The clock will adjust slowly at first and then quicker the longer the button is held.
Daytime running lights are only available on a Candian sold new car. You don't have them if the car was purchased new in the USA.
The airbag light stays on when the computer has detected a malfunction and set a trouble code. The light can not be reset until the failure has been repaired.