remove the screw under the door handle on the inside, and the screw under the panel(front only) and gently lift straight up and there you go! the only thing really holding the panel on is little arms that slide down into a hole all over the backside of the panel. so putting the panel back on isn't a job either.
For a 2000 Chevy Silverado Ext Cab 4 dr 4x4 Z71 Front 6.5/6.75 inch speaker remove door panel and then install new speaker reattach panel. Rear 4x6 inch speaker remove rear door panel and install new speaker reattach panel.
remove the door panel
Remove door panel, remove 4 screws, remove speaker, put new speaker in, replace screws, replace door panel. Done.
rear door-remove the door panel. back speaker carefully pry off grille cover and replace speaker
take door panel off should be screwed to door remove screws take speaker out unhook wires
Take door panel off then it's as easy as 1-2-3
I believe In the silverado door panel the steel mesh that surrounds the speakers should easily pop out with a flat head screw driver, then if you unscrew the four screws around the speaker you can drop them out threw the hole to work or replace them.
Replace the cabin filter. remove panel under dash on pass side.
It doesn't use/require a fuse panel.
Yes, the door panel needs to come off to replace the speaker.
Removing a 1991 Chevrolet Silverado door panel is pretty simple. All you will need to do is to remove the screws holding the door panel in place.
2003 Chevy silverado door panel removal diagram