the cranshaft and camshaft position sensor.
the engine speed and cranshaft position information is supplied frome a sensor which is usually situated at the front or rear of the cranshaft.note that distributor-located engine speed sensor are generally being replaced with cranshaft-located sensors,as worn disributor drives and associated components can effect the accuracy of the engine speed signal.
A camshaft position sensor,or cylinder identification sensor is used to determin the engine cycle position the information is used to provide individual cylinder ignition and injection cotrol.Many engine management systems use an inductive type of sensor that is located near the camshaft;when the camshaft rotates a single signal is passed to the ECU to indicate a reference point in the engine cycle.Some system manufactures may use a Hall effect-type sensor.
Where is the camshaft position sensor on a 2005 Expedition?
The 1995 for Crown Victoria camshaft position sensor can be found on the back of the cylinder head. The camshaft position sensor will be labeled as such.
location of the camshaft sensor
Do you have a video of the hhr camshaft position sensor
There isn't a camshaft position sensor. If you are asking because of an error code you received, it is caused by a signal that mimics the same signal as a camshaft position sensor.
The Pontiac 2.2 liter engine camshaft position sensor can be found on the back of each cylinder head. The camshaft position sensor should be labeled as such.
The camshaft position sensor is located on the end of the camshaft housing, on a 2002 Daewoo. The sensor should be labeled as such.
The Camshaft sensor is located in the distributor.
no
by the camshaft
P0344 Camshaft Position Sensor Circuit IntermittentP0344 Camshaft Position Sensor Circuit Intermittent
Camshaft position is taken from the distributor, there is no separate sensor.