This is not an easy job. The regulator can be purchased for a local parts store and you might want to consider replacing the motor also. Unhook the battery since you will be unplugging the wires to the locks, windows, speakers, trunk release and fuel door. You must remove the door panel and unplug all of the accessories. then you need to peel back the plastic that seals around the door. The speaker should then be removed. This will allow more access to the regulator and the motor. The motor is riveted to the door. So whether you replace the motor or not, it has to be removed also. The rivets can be drilled out with a good 1/4 drill bit. Once the two retainers at the top of the regulator and at the bottom are removed you can twist the regulator and remove it from the door. Remove the motor and place on new regulator or attach new motor to regulator. Once done place back in the door. Now the rivets are 1/4 inch and require a special gun to install. However you can use 1/4 bolts and get the same result. Feel free to email if I can be of any help.
need instructions on replacing window regulator
Look on eBay for the repair kit 3 small plastic parts that will repair the window moter for about 6.00 and if you need a regulator they are there to for 20.00 to 45.00
Cut the cables with a side cutters. Tape the window up until you can replace the regulator. The old one is toast
You probably wont. Chances are, if your window doesn't go up and down right, you have a broken pulley in the window regulator assembly. This is common and requires the replacement of the window regulator.
No, they are not the same. The body style changed in 1992.
You have a broken cable in the window regulator. You will need a new window regulator assembly.
Fuel pressure regulator located on 1998 crown Victoria 4.6 litter
you need a strap for a window,but it usually comes with a motor.You can get it from junk yard
In the alternator
In the alternator
You will have to get a window regulator plastic cable to repair. Will have to remove window regulator motor assembly from door. Plastic cable is usually found in the help section of Autozone store. Can also be gotten at other parts stores also.
2002 ford crown Victoria how to repair crank sensor?