The answer is going to depend on how much of the exhaust system you want to replace and what kind of exhaust you want to use. The price will vary by a thousand dollars or more depending on what you want to accomplish.
The first thing I'd do is go to a reputable exhaust repair shop and get an estimate on a fully stock system using only the parts that they deem in need of repair. That will give you an idea of what your bottom end will be. Make careful note of the components that they suggest replacing. Then with that info you can do some shopping around and finding out what's available in the aftermarket world that will add some pizzazz to the sound of your vehicle and perhaps increase performance as well.
Just as a reference, the exhaust is broken down into the following major compontents: exhaust manifold (can be replaced with headers), the H or Y pipe which connects the two sides of a V8 equalizing the exhaust pressure leaving both sides of the engine, the catalytic converter, the muffler and the pipes that connect all that along with the associated hangers to connect it to your truck. One popular upgrade that's available is called a Cat-Back Exhaust which basically replaces everything from the Catalytic Converter on back. These come in stainless steel for long life or an aluminized steel that resists rust and typically run from close to $200.00 up to around $500.00 minus the installation labor costs. Many privately owned exhaust shops would be happy to install this for you but of course wouldn't provide a guarantee on the parts.
You might try to Google the word exhaust and see whats out there and also make some calls locally. I hope this gets you started in the right direction.
Good luck !!
If you have a dealer do it you should expect to spend close to or more than $2000.00, and if you do it yourself you should expect to pay about 3 days and about $500.00 or less for parts. The whole dash and console has to come out as well as some other things. This is UGLY and could be considered a good reason to buy a different vehicle.
There are 4. One on each side of the catalytic converters in the exhaust system.
Labor cost lifter for jeep cherokee
4 days
I'm trying to replace the headlight assembly for a 2000 Jeep Grand Cherokee Lerado. What bolts or screws do I remove
The 2000 Grand did not use the 318. The O2 sensors are in the exhaust on either side of the catalytic onverter.
£2.50 :)
It is located on the exhaust pipe right where the exhaust manifold connects to the exhaust pipe. It is easy to replace and you can rent the tool from most auto parts stores.
How do I replace water pump on 2004 jeep grand Cherokee
Replace the caliper and bleed the whole system
Jeep grand Cherokees are normally more $ than regular Cherokees, the grand Cherokee was originally made to replace the Cherokee
i think its bad catalytic
In the exhaust pipe, near the engine.
Normally the exhaust
You need to replace the thermostat and flush the system of crud.
There are 4. One on each side of the catalytic converters in the exhaust system.
There never was a 1974 Jeep Grand Cherokee.
already have it loose