0
How to repair turn signals in 1997 Monte Carlo that stopped working - bulbs and relay or flasher were replaced and fuses checked- everything fine -even wiggled signal arm.?
Josina
its probably a bad multi function switch
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
Why have your turn signals died on your 1991 Pontiac Firebird?
Turn signals just quit working- have replaced flasher- checked all bulbs and fuses, checked all obvious wires, cleaned grounds, replaced the turn signal switch (that was an adventure). At a loss- any help out there? Hazards work fine- all other lights work fine- turn signals dead
MY 1990 LeSabre turn signals have stopped coming on Have replaced bulbs flasher and checked fuses Any idea would be helpful?
Perhaps problem in the steering column switch?
The turn signals in my 1988 Firebird don't work I have checked the fuse box and replaced the flasher but still nothing Any ideas?
I have the exact same problem as u in my 87 firebird i dont know what to do
Why would a 1996 Chevy Lumina have no turn signals if you have checked all fuses and bulbs?
Defective flasher relay.
Your turn signals wont work on 2000 dodge durango but checked all the fuses?
Could be the flasher unit.
Why would the turn signals quit working when the hazard lights still work and the flasher and bulbs have been replaced on a 1995 Chevrolet Corsica?
Check the flasher for the turn signals which is under the dash on the left side of the steering column . It is different from the emergency flasher.
93 town car that the signals stopped flashing emergency flashers still work you have checked fuses and bulbs help?
The directional signals and the emergency flasher each have their own flasher unit. They are the same type of flasher and should be beside each other under the dash.
The emergency flasher and turn signals dont work on a 1996 Saturn sl2?
I checked the fuses first, they were not blown. Next I replaced the turn signal relay that is located on the back side of the fuse panel inside the car. That was the problem.
SOMEONE....please help....all of the sudden my turn signals and hazards are not working on my 1998 crown victoria. it is definitely not a fuse problem...what is it?
Have you checked the flasher fuse. Its in the fuse box by the brake pedal. Its the larger round one, you might have knocked it out of place or it has to be replaced. Check it out. When the flasher is on, you can hear a ticking coming from it.
What would cause the Turn signals to quit working and all other lights work hazards work also Changed turn signal switch this is for a 1988 GM sierra and Checked all fuses and flasher uit?
Blown fuse or bad flasher unit. Often, cars use different flasher for the turn signals and the flasher, so it is possible for the hazards to work and not the turn signals.
You have a 1983 Chrysler e-class and both your turn signals and brake lights don't work you have checked your fuses and everything Why aren't They still working?
check the ground on your tailights R.W: Have you checked the turn signal switch? That may have to be replaced.
I replaced the flasher and my turn signals still don't work on my 1999 Mercury Cougar?
If you replaced the flasher on your 1999 Mercury Cougar and your turn signals are still not working, you should check the turn signal fuse. This fuse is located under the dashboard on the driver's side of the vehicle to the left of the steering column.
