0
I have an 70s MXR Flanger Pedal that lights up when pressed but doesn't apply the effect so where can I get this fixed or fix myself and will it cost more to fix it than a new pedal?
Wiki User
∙ 7y ago
Check the foot switch is probably what is failing normally this is the part that has more wear and tear because of the constant use of not having a solution study the possibility of buying a new foot switch as last recommendation to fail the previous purchase a pedal new
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
2000 Chrysler 300m rear right tail lights do not work but those same bulbs do work when the brake pedal is pressed What is the problem?
My Brake tail Lights Stay on when my car is complete turned off and my lights are off to.
Is it a fuse if your radio and indore lights does not work 95 explorer?
Likely, check the fuse panel for blown fuses. if this doesnt solve the problem you likely have a short in the wiring under the dash. you also should check the bulbs for the interior lights, its also possible you have them switched to off, where they wont come on at all. check the one in the center of the vehicle to see if it has a switch, if it does make sure its set to DOOR, check the fuses and bulbs, then if these are all set and it doesnt work have a mechanic check your wiring.
Can one contest failure to dim ticket in CA?
I'd say probably as long as the police officer doesnt have video footage of him traveling past you. A lot of times some people have really bright head lights.
No dash lights no tail lights you do have brake lights 1999 Corvette?
replace fuse
What are fairy lights made out of?
fairy lights aremade out of many small lights. the lights are like the lights you put on a Christmas tree, but smaller. they are filled with gasses used in go green light bulbs.
Which of the following statements provides a reason why a scanner that worked previously lights up performs a warm up process but the lamp doesnt respond when the scan button is pressed?
The scanner lamp is stuck and locked in place
When foot brake is pressed which light must come on?
The brake lights.
Why do brake lights on your 1978 Ford Fairmont come on when brake is pressed lightly but when pressed harder lights go out?
Probably a faulty brake light switch or the brake light switch is installed incorrectly.
When the foot break is pressed which light must come on?
The rear brake lights.
Dash lights comes on when brake is pressed and third brake light comes on with park lights?
wrong bulbs or bad earth
Should brtake lights come on without key when peddle is pressed?
yes they should
When the foot brake is pressed which must come on?
The red ones in the rear of the car. Note: They are separate from and next to the red lights that are on constantly when you turn your head lights on.
Why don't tail lights or dash lights work but brake lights do with no blown fuse?
Try chamging the bulb, and if that doesnt solve your problem, check all the wiring.
What would be the problem if when pressed the brake brake pedal clicks?
nothing it could just be the tail lights coming on.
On a 91 Camry should the brake lights come on as tail lights when you turn on lights or remain out until brakes are applied even if lights are turned on?
In the back should be tail lights which always come on when the headlights or parking lights are on, and stoplights which come on whenever the brakes are pressed. The stoplights should be brighter than the tail lights, but they should be separate.
2000 Chrysler 300m rear right tail lights do not work but those same bulbs do work when the brake pedal is pressed What is the problem?
My Brake tail Lights Stay on when my car is complete turned off and my lights are off to.
Where is the Brake light switch Nissan pintara 1988?
There is no switch to activate or deactivate the brake lights on a 1988 Nissan. The brake lights automatically turn on any time the brakes are pressed.
