no. no it is not
"What is the difference between single plate clutch and multi plate clutch?"
Worn clutch? Pressure plate may have a weak spring
to wire the license plate lights you must have lights and wire them to the scooter.
At the clutch plate and the pressure plate.
Clutch, yes. Pressure plate, No.
Broken clutch cable or clutch pressure plate fork.
The springs around the clutch plate have probably came out and locked up between the pressure plate and the clutch plate and locked them together. you need to change the clutch plate and have the pressure plate checked for damage.
a pressure plate works by springs. when disengaged the tension is released from the springs which hold the clutch plate against the flywheel,allowing the clutch plate to spin free,which basically stops the transfer of power from engine to gearbox when clutch is engaged the tension is reapplied to springs in pressure plate forcing the clutch plate against the flywheel
The clutch will have to be replaced. The pressure plate could possibly be resurfaced but usually it is as cost effective to replace the pressure plate.
clutch plate,pressure plate,throwout bearing
A clutch pressure plate is used to clamp the disc to the flywheel and transfers the power to the transmission.
The pressure plate is what the clutch presses against to drive the transmission. The plate is a metal round disk that needs to be smooth for a good connection to the clutch.