A hand held test meter is usually rated for 1000 volts.
dfjakl;jdfkljafkld
When a light bulb is rated for 3.2 V it means that it is the maximum operating voltage to be applied to the bulb.
Use a voltage meter.
With an unknown voltage you should start out with the highest voltage setting on the meter. Doing this reduces the risk of "pegging" out the needle on an analog gauge or overloading the input of a DMM. Most DMM's are auto-ranging though.
i beleve it is 12 volts
Depends on the meter. If unknown, to be safe do not exceed the value of the highest range.
A meter that you find in large distribution panels only receives part of the supply voltage. The volt meters have a full scale deflection of 5 volts. The amp meters have a full scale deflection of 5 amps. These meters are supplied from, for voltage, potential transformers and for amperage, current transformers. The transformers are ratio driven so that the maximum input will always produce a 5 volt or 5 amp output.The legend on the meter is matched to the transformers. For example, if the maximum current applied to a current transformer is 300 amps then the transformer ratio will be 60:1. So for every 60 amps the transformer detects the meter needle will move up to a position on the meter face equalling 60 amps. This is a linear movement all the way up to full scale deflection of 300 amps equalling 5 amps to the meter.
maximum generated voltage is 21KV
Voltage amplitude is the maximum value of a voltage.
15.5 volts maximum.
Fuses are rated by amperage (current) and voltage. The larger the current need, the larger the rating of the fuse, to handle the current. The voltage rating of a fuse defines the maximum value of circuit voltage in which the fuse can be safely used. A fuse should not be used in a circuit with a voltage exceeding the voltage rating of the fuse.
yes. the 250v just means that's the maximum voltage rating the fuse can handle .. so it can def handle 125v. just not vice versa.
Alternator Output Voltage RangeGenerally, alternator output voltage is consider OK if it is in the range between 12 1/2 volts to a maximum of 16 volts.Therefore, although the output is at the maximum, you do not seem to have a problem.Usually, if the battery has had a lot of drain, then the alternator output will run at the maximum until the battery is fully charged.
440 volts can be handled practically by commercial power systems and homes. Higher voltage would be restricted to industrial applications.
The maximum level of voltage allowed for a person to be exposed safely.
If the 2003 Spectra keeps blowing a meter fuse when plugged in, the power source is probably not big enough to handle the voltage. An electrician will be able to rewire the meter fuse box so that the auto will no longer blow fuses.
A capacitor can charge to its' maximum OR the voltage applied to it, whichever is LESS.