* Disconnect the negative battery cable * Loosen the tensioner and remove the drivebelt * Using a large syringe or suction gun suck as much fluid out of the Power Steering fluid reservoir as possible.Place a drain pan under the vehicle to catch any fluid that spills out when the hoses are disconnected * Loosen the right front wheel lug nuts,raise the front of the car and support it securely on jackstands and remove the wheel * Working under the car remove the pressure line to pump banjo bolt then detach the line from the pump.Remove and discard the copper sealing washers.They must be replaced when installing the pump.Wrap a plastic bag around the end of the hose to prevent fluid spillage * Loosen the clamp and disconnect the fluid return hose from the pump and plug the hose * Detach the right tie-rod end from the steering knuckle arm and swing the tie-rod to the rear out of the way * Remove the pump mounting bolts then guide the pump out through the fenderwell
seems like the steering pump should have been repaired or replaced
um that is hard to say
how to change the reservoir of a power steering on breeze 1998
how much is it going to cost me to replace the back struts on my Nissan maxima
Search Wiki for 1998 Chevy Suburban power steering pump replacement, the author based his answer on a 1997. Enjoy
the 98 do not have a power steering Gear box. if your refering to the rack and pinion. do yourself a favor and go buy a haynes manual, if your talking about the power steering Pump.. again haynes.
take it to a brake specialist
You can use power steering fluid or ATF.
Because they have no power steering. I have a 99...
cause your power steering pump has died... try hit it with a hammer :)
The cost to replace a front strut rod bushing on a 1998 Nissan Maxima is between $50 and $150, for a person who does it on their own. The cost varies based on the part brand or kit bought.
It is by the power steering pump. You might have to remove the power steering pump. It took me one hour to remove the old sensor and about twenty minute to put on the new one.