12 ft/lbs but its better to use 1/4" torque wrench set at 144 in/lb so you don't over tighten.
Torque specs for main bearing
1991 toyota camry head bolts torque specs
The torque specs for a Toyota Camry cylinder head is 60 pounds for the inside bolts and 50 pounds for the site bolts. The cylinder head bolts should be tight from and to end alternating.
216 nm
98 toyota tacoma head bolt specs
51 FT. LBS.
The 1995 Toyota 3.0 liter engine main bearing torque specification is 160 pounds. The rod bearings torque specification is 120 pounds.
Torque as follows 53-63 ft/lbs. in 3 steps
The 1995 Toyota Tacoma thermostat housing torque specification is 40 pounds. The amount of torque on the thermostat housing bolts is not that important. You basically do not want to break the thermostat housing bolts.
The torque specs and pattern on the head bolts for a 1991 Toyota pickup with a 3.0 EFI is 50 foot pounds per bolt. The pattern is 4,5,6,3,7,2,8,1 with 1 being at the front of the engine.
80Lbs for flywheel, 10 to 15lbs for pressure plate
n-14 rod and main bearing torque specs