Many devices have traditionally been connected to a parallel port. The most common usage was for printers. Image scanners, external hard drives, and Ethernet adapters have also been created for the parallel port.
The parallel port can be used for many different devices. It is most commonly used for printers, giving the parallel port the nickname "The printer port". It is also commonly used for Iomega Zip and Jazz drives.
In modern computing, however, the parallel port is rarely used. Because of that, computer enthusiasts will sometimes use the parallel port for case modification hacks, common hacks involving LEDs.
The parallel port was phased out with the introduction of USB, a bus type network that allowed for faster speeds, PnP, and up to 127 devices per controller.
Yes, you can print your digital photos at home. All you need is a printer capable of printing photos and photo paper. Generally, the printers that are good for this type of work usually cost around $200-$300.
The DB 25 is the most common connector. Most parallel ports are used for linking computers and printers in everyday use.
One end is the Centronics connector and the other end is 25 Pin D type connector.
Before USB, the parallel port was always used for the printer.
Db25 and centronics36
BNC
Parallel ATA (PATA) is an IDE standard for connecting storage devices like hard drives and optical drives to themotherboard. PATA generally refers to the types of cables and connections that follow this standard.It's important to note that the term Parallel ATA used to simply be called ATA. ATA was retroactively renamed to Parallel ATA when the newer Serial ATA (SATA) standard came into being.PATA cables are long, flat cables with 40-pin connectors (in a 20x2 matrix) on either side of the cable. One end plugs into a port on the motherboard, usually labeled IDE, and the other into the back of a storage device like a hard drive.Some PATA cables have an additional connector midway through the cable for connecting yet another storage device.PATA cables come in 40-wire or 80-wire designs. Most modern storage devices require the use of the more capable 80-wire PATA cable to meet certain speed requirements. Both types of PATA cables have 40-pins and look nearly identical so telling them apart can be difficult. Usually though, the connectors on an 80-wire PATA cable will be black, gray and blue while the connectors on a 40-wire cable will only be black.Also Known As: PATANote: Even though PATA and SATA are both IDE standards, PATA (formally ATA) cables and connectors are often referred to simply as IDE cables and connectors. It's not a correct usage but it's very popular nonetheless.Examples:"My motherboard has 4 slots labeled IDE. I used a three-connector PATA cable to connect my hard drive and CD burner to one IDE port and used another PATA cable to connect my backup tape drive to the second IDE port. It's good to know that I have two more IDE ports left on the motherboard for future use if I need them."
Unless your hub has a switchable port, you use a crossover cable.
The "Ethernet Port" Obviously is used for the Ethernet cable which often connects computers to a router. A router is a device that gets the Internet or from the phone/Internet port and routes it to your computer routers are required for ADSL and ADSL2+ to work. Oftener more than one computer is connected to the router. But this setup may be different for "Cable Internet because i have never had cable.
10base-T uses for twister pair cable which speed 10mbps.
Since about 2002, a USB port is the most likely port to be used for a printer. <><><> A 16 bit parallel port can be used if the PC is of the old type that has one, but only If the printer is of an older type that has the appropriate logic circuits, connectors and compatiible printer driver software.
A parallel port can be used to connect a large number of devices. The most common usage was for printers, although scanners, external disk drives, and network adapters also used this port. With a special cable, two computers could also be connected directly for sharing files.
Parallel Port
This is a 25 pin cable, usually used to connect a printer to your computer (parallel port). Most printers connect using the USB cable anymore, as other external devices.
parallel port
Cable connectors are used on coaxial cables, which are ports in the wall that connect to a TV. The connectors are used to either link together two coaxial cables or split it off into more than one.
BNC
A Parallel Port (LPT1 and LPT2)
Generally USB connectors or serial 29 pin parallel connector is used for this perpose.
Rollover cable is used.
USB port.
If the printer is of an older type that has the appropriate logic circuits, connectors and compatiible printer driver software, a parallel port and/or a serial portcan be used if they are available on the pc.