the torque sequence is as fallows, looking at the motor from the front of the car i'll call the side toward the front of the car the front and the back towards the windshield the back and will go from left to right, #1 second back in front, #2 second one back in the back, #3 third bolt back in the back, #4 third one back in front, #5 first one in front, #6 first one in back, #7 forth one in the back, #8 forth one in front, so the back bolts are from left to right 6,2,3,7, front 5,1,4,8. start by tightening the bolts in sequence to 33 pounds then to 90 pound in sequence, butch
The torque sequence is 25 ft lbs, 50 ft lbs, 50 ft lbs, and a 90 degree turn.
Tighten the bolts to 60 nM (44 ft. lbs.) in sequence. Tighten the bolts to 60 nM (44 ft. lbs.) in sequence.
The 1994 Nissan Pathfinder had bolt torque specification is 140 pounds. There is not any removal sequence. There is only a sequence to put the bolts in.
If you mean engine performance, then it has 240 hp and 280 lbs of torque
The Lexus cylinder head bolt torque specification is 150 pounds. The cylinder head bolts should be torqued in 50 pound intervals.
What is the Cylinder Torque sequence 2000 Pontiac Montana 3.4V6
A 1993 Pontiac Sunbird head bolt torque sequence recommends starting at one and of the head and alternating to the other end of the head. You should end up in the middle.
number 8 reverse torque
go to autozone.com current vehicle upper left choose car repair info vehicle repair guides u may b able to find it there
what is the head torque sequence for a 1991 pathfinder
i need the torque sequence for a 1998 pontiac grand am 2.4 quad
This is the order for the bolts. I do not know the torque. Assuming that the graph is a top view of the head bolts. --8--4--1--5--9-- --7--3--2--6--10--
From:http://www.autozone.com/autozone/repairinfo/specifications/specificationsMain1993 Pontiac Lemans-Import 1.6L TBI SOHC 4cylApplication:Cylinder head bolt torque sequenceNote :Torque sequence ----------------| 8 4 1 5 9 || 7 3 2 6 10 |----------------Step 1: Torque in sequence 18 Ft/LbsStep 2: Torque in sequence 60 degreesStep 3: Torque in sequence an additional 60 degreesStep 4: Torque in sequence 30 degreesrecheck final torque in sequence>*** CAUTION ***
Which engine?? The 3.1 V6 does not adjust. You simply torque them to 20 foot lbs.
21ft lbs
the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs.
in sequence torque bolts to 20nm, then again in sequence turn a futher 120 degrees, and again in sequence 120 degrees.