Iam pretty sure that baseband coax was 50 ohm and was used for networking computer, were broadband coax is 75 ohm and used in the cable tv industry.
A baseband signal is the original signal before it is modulated onto a carrier, mulitplexed or mixed.
A broadband signal contains many channels which have been modulated or multiplexed onto a common carrier.
The significant difference is the bandwidth of each.
The impedance of the cable which carries either of them is totally irrelevant to the definition.
Different frequencies in telephony and radio.
What_is_difference_between_base_band_and_broad_band broad band?" kagabo@hotmail.com
Coaxial Qr is a coax cable that has been developed to met the demands of broadband or internet. At the moment it is considered to be the best of all the coax cables out there as it is very flexible and reliable.
The centre lathe has only one coaxial tool, whereas the capstan has a rotating multi tool station with indexer and clutch.
coaxial cable speed is slower than fiber optic cable. it is main disadvantage of coaxial cable
Coaxial cables are conductors that send an electrical signal through an inner conductor which is surrounded by a protective insulating layer and sealed by a shield. The cable itself is protected by the outside insulating layer. Coaxial cable is commonly used for video and CATV transmission. The advantage is that electromagnetic fields have less leakage outside the shield.
RG-6 and RG-59 are the most common types
The difference between baseband coaxial and broadband coaxial cable is baseband coaxial technology uses digital signaling in which the cable carries only one type of digital signal. Where as the broadband coaxial technology typically transmits analog signals and is capable of transmitting multiple frequencies of data simultaneously.
Twisted-pair cables Coaxial cables
Iam pretty sure that baseband coax was 50 ohm and was used for networking computer, were broadband coax is 75 ohm and used in the cable tv industry.
Difference between coaxial cable and STP cable used for computer networking?
test
RG-59 is the most common coaxial cable used for broadband CATV connection.
There are two types of cable used for television radio frequency signals: 300 ohm twin lead flat cable and 75 ohm coaxial cable. The twin lead is typically used with a rabbit ears antenna and coaxial is typically used with roof top antenna or cable TV setups.For television baseband video signals coaxial cables are usually used.However for digital television baseband video signals these are not adequate and special cables (e.g. HDMI, DVI, DisplayPort) are used. These cables are typically many twisted pairs in a common shield.answer is Coaxial cable
Coaxial Qr is a coax cable that has been developed to met the demands of broadband or internet. At the moment it is considered to be the best of all the coax cables out there as it is very flexible and reliable.
Waveguides are used at higher frequencies where their loss is lower than coaxial cable. Coaxial cable is used at lower frequencies where waveguides are too large and heavy. Lastly Coaxial cable is also used at higher frequencies where some flexibility is required.
guided media is that media which use some physical path like coaxial cable fiber optics etc
a. Because most office buildings are not wired with coaxial cable
10BASE2 is a variant of Ethernet that uses thin coaxial cable. The 10 comes from the maximum transmission speed of 10 millions of bits per second, The BASE stands for baseband signaling, and the 2 supposedly refers to the maximum cable length of 200 meters.