hahahhahahahaha
class C
Here is qn excellent article that explains step by step: http://MasteringElectronicsDesign.com/how-to-derive-the-instrumentation-amplifier-transfer-function/
current gain
Radar receivers have to be tuned to the precise frequency of the transmitter, in order to get the best detection and thus the best picture. The transmitter generates microwaves from a device called a magnetron. The exact frequency can vary with age and temperature. To pick up the echo generated from the pulsed microwave, the receiver is able to be tuned, to allow for differences in transmitter frequency. The control on the radar receiver display, called 'tuning', actually alters the receiver frequency, not the transmitter frequency.
The function of a receiver is a vessel to store the air, pressurised by the compressor. To regulate that pressure. To ensure the tools receive air at the correct pressure and at the required volume.
Depends on what your definition of "receiver" is, but most of the time - to the amplifier. Consider: if the receiver is some form of a device that receives some signal, and then decodes it to audio, then the receiver will hook into the amplifier, which in turn will drive the speakers (so the speakers go to the amplifier) if, on the other hand, the receiver is a part of a wireless connection between the amplifier and speaker, then it really serves the role of a cable, so in essence you're again connecting the speakers to an amplifier (only using the receiver as an intermediary) You would have to specify your case.
No, because in a pure amplifier the radio part is always missing.
Is this sentence supposed to be question? Any superheterodyne receiver will have an IF amplifier. It doesn't matter whether TV or radio.
ideally "line out" on the receiver to "audio in" on the amplifier, left and right... If there isn't a "line out" use the the "audio out" but keep the volume on the receiver relatively low to prevent overdriving the inputs on the amplifier.
class C
receiver
As a frequency receiver
rf is a single tuned amplifier . Its functions are :- 1.improves selectivity ( i.e rejection of unwanted signal) , so that it prevents heterodyning which results in interference frequency. 2. improves image frequency rejection 3. improves sensitivity ( gain of amplifier ) 4.improves coupling of receiver with antenna . 5. improves signal to noise ratio. 6. reradiation of local oscillator through receiver antenna is prevented
The receiver is the amplifier for all the speakers, except usually the sub, which is most common with its own amplifier.
A cobra detector is a radar detector. Radar detectors work the same way a radio receiver does. The radar detector looks for frequencies that a radar gun uses.
radio frequency amplifier intermediate frequency( If strip) in a superheterodyne radio mixer /demodulator Audio amplifier
An amplifier is used to increase the strength of the signal.