A couple of years ago, I did a successful Google search for such an item from the US. Plastic Fresnel lens.
But don't forget, concentrating the sunlight from such an area into a smaller area will produce heat that is instantly damaging!
Sunlight can be of the order of 1kW/m2, So you can easily have concentrations of 10 - 100 times this quantum!
You can't. It is barely visible from low orbit, but so are many other man-made structures. The Great Wall may be hundreds of miles long, but it is only a few yards wide, so you can see it from no further than you could see any building with the same minimum dimension.
maximum: 36 degrees C minimum: -123 degrees C
a sunspot minimum (also known as maunder minimum) is the name used for the period roughly spanning 1645 to 1715 when sunspots exceedingly became rare as noted by solar observers of the time.
The Maunder Minimum, also known as the "prolonged sunspot minimum", is the name used for the period starting in about 1645 and continuing to about 1715 when sunspots became exceedingly rare, as noted by solar observers of the time.
minimum height of a habitable room is 2.18 meters and maximum is 4.2 meters.
0.004 to 0.06
10
Rational dimension refers to the dimension of a vector space over the field of rational numbers. It is the minimum number of linearly independent vectors needed to span the entire vector space. The rational dimension can differ from the ordinary dimension of a vector space if the vectors are over a field other than the rational numbers.
Lines that define the parameters of a dimension.Dimension lines are thin lines terminating in arrowheads. Place dimension lines no closer than 3/8" from the object outline. Parallel dimension lines should be a minimum of 1/4" apart. You may place parallel dimension lines more than 1/4" apart so long as the spacing between dimension lines is uniform throughout the drawing. Dimension lines are generally broken in the center of the line to provide a space for the dimension figure. Dimension figures for parallel dimension lines are staggered. In some structural or architectural drawings, you may find dimension figures placed above the dimension line.
The height of scaffold tower is four (4) times the minimum base width.
There is no limit to the maximum perimeter length of an area. To increase one dimension decrease the other. This can be done without limit. There is on the other hand a minimum
Microscope - device used to view objects which are too small to see or explore with your eye alone. Compound - when a scope has a minimum to two magnifying lenses. Binocular - two eyepieces. Monocular - one eyepiece.
Depth: 12" is the minimum, 18" is ideal. Width: at least 12" next to your sink to work/mix/etc. These dimensions are in my opinion for the most convenience after building my own wet bar. Mine is 36"x18" with a 10"x13" sink.
It should run it fairly well, as that exceed both the minimum and recommend requirements.
This is a microATX (mATX) motherboard that measures 9.6 inches on a side, which is the maximum size for a mATX board. The minimum size for this style of board is 6.75 inches on a side.
In Ontario, Canada, a basement window to be used for egress must have a minimum open area of 3.8 ft² and no dimension less than 15" when open. This requirement changes to 4.1 ft² and no dimension less than 18" when the basement is a separate dwelling unit (i.e. basement apartment).
According to the International Plumbing Code (2006 IPC) the following are the minimal dimensions for a shower: All shower compartments shall have a minimum of 900 square inches of interior cross-sectional area.Shower compartments shall not be less than 30 inches in minimum dimension measured from the finished interior dimension of the compartment, exclusive of fixture valves, showerheads, soap dishes, and safety grab bars or rails. Except as required in Section 404, the minimum required area and dimension shall be measured from the finished interior dimension at a height equal to the top of the threshold and at a point tangent to its centerline and shall be continued to a height not less than 70 inches (1778 mm) above the shower drain outlet. Did you get all of that? If not here are some dimensions in plain english. 36" by 36" is about standard for a shower stall, but 30" by 30" is the minimum. However, if you own a " STARTER MANSION" then all bets are off, because the standard must be exceeded and your shower must be the largest shower in the neighborhood... LOL Hope this helps! Terry