Toyota pickups with the 4 cylinder engine: Look for the frost plug on the RIGHT side of the engine block near the oil filter. In order to get the frost plug out you can try the usual tap via a screwdriver or small chisel to one side to make it pivot in place, whereupon you can get a vice grips on one of the edges and pull it out, or for a no-danger removal drill a hole and pull it out via some sort of hook. IF you look at the installation instructions for the block heater they should have all this and more.
Where is the plenum bolt for a 1994 toyota pick-up
on the right side of the block either beside or below the oil filter.
A block heater is not a standard feature, and few manufacturers offer them as an option. Usually, they are installed by the owner, or for the owner at a shop.
Block heaters are not installed by the manufacturer. So, unless a prior owner installed one, you do not have a block heater. If you do, it will have a standard 120 volt AC plug hanging somewhere.
depends on what motor is in both of them are they both 4cyle or 6cyle
yes
between the grill and radiator
The engine oil capacity of a 1990 Toyota pickup is 5 quarts. This includes replacing the oil filter which stores a small amount of oil.
It will fit, obviously the body styles will clash abit, but no biggy
very carefully
4" in front dash
About 15 gallons