The crank sensor is located on the back engine wall in the middle, just under the two coil packs (from where the spark plug wires come). There is a wire harness from the crank sensor to the module which holds the two coil pack. The crank sensor is held into the engine by a single bolt. To see all of this, you have to go under the car. I am having an intermittent no start problem with my 93 Cavalier (it cranks, but no spark at all) and I think the crank sensor is my problem.
In the back by the coil pack.
Problem with the signal from the Crank Sensor.
its at back of engne just under the manifold
Rear of the engine block.
It is located on the back side of the engine, where the distributor originally went.
On the firewall side of the engine block, near the transmission bellhousing, under the intake manifold that answer sir, is incorrect, the cavaliers did not use a cam sensor, only a crank sensor, but the location is right for the crank sensor
where is the crank sensor located on a 2005 chevy impala
To test a 1995 Cavalier crank sensor you would need to get a mechanic's computer. They can put a sensor/fuse tester on it and see if it is working properly.
The crankshaft position sensor is located behind the starter on the front of the engine. Hope this helps! Mitch art_y2k1@yahoo.com
Bob
it is next to the coils at the rear of the engin between the tranmission and the engin
Chevy did not use a crank sensor on that year.