It's on the front side of the block, just above oil filter.
The plug or sensor above the oil filter on a 1996 Cherokee is the oil pressure sending unit. This sensor controls the oil pressure gauge.
This sensor is at top rear of engine, next to distributor.
The oil pressure sensor is located on the back of the engine, next to the distributor.The oil pressure sensor is located on the back of the engine, next to the distributor.
Oil pressure
Engine Oil Pressure Sensor and/or Switch Replacement == J 35749 Oil Pressure Switch Socket # # Remove the air cleaner outlet resonator. # Disconnect the oil pressure electrical connector. # Remove the engine oil pressure sensor (1) usingJ 35749 . # # Install the engine oil pressure sensor (1) using J 35749 . # Connect the oil pressure electrical connector. # Install the air cleaner outlet resonator.
the answer to this question depends greatly on just what it is you have one on, whether a Taurus, Caprice Classic, or a 1942 Potatoe Packing Machine. the oil pump, the pressure sensor, the pressure guage,and the idiot~light may all be located in many different locations irrelevant to one another. Typically, the pressure sensor is located on the engine block, nearest the oil pump
Because it is not a good car!
Oil pressure is low, oil pressure sensor has failedOil pressure is low, oil pressure sensor has failed
there is no oil pressure in my 1997 ford taurus, but the oil is full?
Find the biggest oil leak with a wire leading out of it just above the oil filter
If that S10 has a 4.3 engine, I find it best to remove the distributor to gain better access to the oil pressure sensor.
I do believe that the oil sensor in a 1996 Jaguar tells you how much oil you have and it tells you the oil temperature.