On single handle shower valves, designed to let cold water first and turn handle farther to mix hot water to desired setting. If hot water turned on first, possibility of getting scalded. If seperate hot/cold handles for shower, shower valve needs work.
The plaming tubes are all conected.When the cold water run in kitchen the cold water at the shower become less,so with less cold water at the mix cold-hot (the balance is desterb),making the water hoter.Same if you turn on the hot in the kitchen the water will be colder in the shower.
A new hot water tank wouldn't let the water get as cold. Or you can get out of bed, turn the hot tap on, go back to bed for ten minutes, turn it off, go back to bed 10 minutes then go for the shower and the water will be hotter.
Yes, normally H signifies hot water, and C signifies cold water.
The main benefit of a mixer shower is that the hot and cold water is mixed without having to turn two knobs. People don't have to mess with different knobs to get the right water temperature for their shower.
We had the same problem and all my mom did was turn on the hot water some way shower or sink and wait 10 minutes and bang the heater. If that doesn't work then try calling your service person.
Remove the handle, turn off the water with a wrench and reatache the handle in the correct position. Good Luck
If the water is cold enough it will turn into ice.
I have showered with my boxer since he was a puppy. I shower first then I turn the water down to about "luke-warm" and put him in and bathe him. I have had him since he was about 10 weeks old.
get it in a tub or shower and turn on the tap,not the shower pour water on it so its not scared then turn on the shower if its still scared keep it in with water on and simulate (fake) some thunder then it should be ok
The temperature setting on your hot water heater may be set too high. There is an adjustment behind the panel.
Yes and what is the question?
you did not pay bill