You would replace a flush valve or 'flapper' when it gets distorted or leaks slowly as they all eventually do. Take it out and go to Home Depot and you will see many better ones than there were when your toilet was made. Average cost $6-10.
Easiest way would be to replace the flush valve, otherwise there is a washer underneath that is easily replaced
That would be your flush valve in the tank
I would use my shrink-ray and then flush it.
You will probably clog your toilet or pipes if you flush anything but toilet paper. I would not recommend trying to flush underwear down the toilet.
because there is a Dukie stuck in the bottom of the toilet so you have to take out your toilet and flush the system.
Which part, the tank or the bowl? If it's the tank, you have a problem with a restriction between the tank and the bowl. If it's the bowl, you have an obstruction in either the neck of the toilet or the drain pipe below the toilet.
it would be impossible unless you had a toilet bigger than you!
If the toilet works each time on one flush, they use roughly half the water of a standard toilet. You would then use half as much a month on the toilet. They do not always flush completely on the first flush and the toilet is only a part of the water bill.
If you flush old pills down the toilet it go into the sewer......then it would into a creek,a pond,or a stream.
On the inner rim of your toilet where the water flushes out from the cistern, if these small holes are blocked it wont make the right angled pressure to flush a toilet
it would depend on the size of the pawn. ;)
A "Sloan Valve" is the well known valve used on (primarily) commercial toilets and urinals. Touching the chrome handle causes the toilet to flush, violently washing your troubles down the drain. What does that handle do and what makes the toilet flush with such great force? If you look closely, the pipe coming into the valve is much larger in diameter than an ordinary toilet's pipe. This is the secret to the Sloan Valve. The normal water pressure in the building pressurizes the big pipe and when the famous chrome handle is moved, the water in the big pipe is allowed to dump all at once into the toilet. When most of the water pressure in the big pipe is depleted the chrome handle resets and the water stops flowing. If the toilet had a small pipe like most other toilets, the large water volume would not be possible, and the high power flush that we have all grown to love would not be possible. So, the Sloan Valve is not the secret at all. It's the large pipe ahead of it that stores all the water and it's associated pressure. The Sloan Valve is just a large valve capable of releasing it all at once.