Check the 92 Camaro neutral safety switch next. If the switch is faulty then the starter will not get power to start the engine.
purple is the trigger wire for the starter. Yellow is the ignition wire.
This could be a bad ignition switch, ignition relay, or ignition fuse.
Your neutral safety switch-try putting car in neutral and trying it
How do i change the ignition switch in a 1988 Chevy camaro
A 1981 Camaro starter should only have two wires. One cable directly from the battery and one purple wire directly from the ignition switch.
Starter Ignition Neutral switch
might be starter relay, or the crank circuitry from the switch or to the starter from the relay. I would trace back from the starter to the starter relay back through the neutral safety switch to the ignition switch.
You will need to remove the retaining ring from the top of your 1997 Chevy Camaro ignition switch. The ignition switch will slide out. Remove the wiring harness. Reverse the process to install the new ignition switch.
Check fuses and relays. If you have power coming from the ignition switch but not getting to the starter there might be a bad fuse or relay or wire. Also make sure you have the wiring correct to the starter since you just replaced it.
The 2001 Chevrolet Camaro ignition switch is held in place with a retaining ring. Remove the retaining the ring and slide the ignition switch out. Remove the wiring harness. Reverse the process to install the new ignition switch.
Bad ignition switch or starter solenoid
The starter solenoid, or ignition switch is bad, and either one needs to be replaced.