0
Your 92 camaro wont start replaced starter and ignition switch has power but wont turn over what else could it be?
Wiki User
∙ 9y ago
Check the 92 Camaro neutral safety switch next. If the switch is faulty then the starter will not get power to start the engine.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
What color wire is the ignition switch on a 1969 camaro?
purple is the trigger wire for the starter. Yellow is the ignition wire.
92 Chevy 2500 you have replaced the starter when you turn the key the starter wont engage?
This could be a bad ignition switch, ignition relay, or ignition fuse.
No voltage at starter solenoid replaced ignition switch and starter relay?
Your neutral safety switch-try putting car in neutral and trying it
How do you change the ignition switch in a 1988 Chevy Camaro?
How do i change the ignition switch in a 1988 Chevy camaro
Can I see aWiring diagram for 1981 Camaro starter?
A 1981 Camaro starter should only have two wires. One cable directly from the battery and one purple wire directly from the ignition switch.
Your F150 will not start and will not take a jump the alternator solenoid and battery were replaced is it most likely the starter?
Starter Ignition Neutral switch
1995 Dakota won't start battery good starter good will push start can arch the strater and will start and run replaced ignition switch still nothing?
might be starter relay, or the crank circuitry from the switch or to the starter from the relay. I would trace back from the starter to the starter relay back through the neutral safety switch to the ignition switch.
How do you change the ignition switch on a 1997 Chevy Camaro?
You will need to remove the retaining ring from the top of your 1997 Chevy Camaro ignition switch. The ignition switch will slide out. Remove the wiring harness. Reverse the process to install the new ignition switch.
1992 Mighty Max won't turn over Replaced Ignition switch and starter and still doesn't turn over?
Check fuses and relays. If you have power coming from the ignition switch but not getting to the starter there might be a bad fuse or relay or wire. Also make sure you have the wiring correct to the starter since you just replaced it.
How do you change a ignition switch on a 2001 Chevrolet Camaro?
The 2001 Chevrolet Camaro ignition switch is held in place with a retaining ring. Remove the retaining the ring and slide the ignition switch out. Remove the wiring harness. Reverse the process to install the new ignition switch.
96 tacoma starter engaged and burned up while driving Replaced with new starter 20 miles later doing it again?
Bad ignition switch or starter solenoid
What could be wrong if you have to start a 96 Pontiac Sunfire by putting a screw driver on the starter?
The starter solenoid, or ignition switch is bad, and either one needs to be replaced.
