there is no switch indicator. this model has OBD II and needs to be "scanned" with a compatible tool. sorry...
Take out the side indicator light assembly (which is most difficult part) and then replace the bulb.
Toyota tercel, Automotive Repair Manual, 1987 thru 1994. (Haynes)
you need to take it to a repair shop and have it scanned for codes.
After the repair, you reset it with an OBD2 scan tool.
It is reset with a OBD2 scan tool, after the repair of the system.
The VIN number should have an indicator. VIN number references can be found online or in the repair manual for your car.
how to repair a citreon saxo indicator bulb
A repair manual for a Toyota manufactured vehicle can be found through the Toyota website. Free service manuals can be found online at the website 'Repair Service Manuals' under Toyota.
You will have to get a engine scanner and scan the engine. And it will give you the trouble code or codes, and then fix the problem. The computor is seeing a problem in the engine system or transmission system. Need to repair.
According to Toyota repair manual.... during assembly being carefull of camshaft alignment marks in relationship to crankshaft or damage to engine will occur..
You read the codes with a scanner, repair the cause, and clear the code with the scanner.
If the indicator stays on all the time, the vehicle thinks the seatbelt is not connected. The reason for this is probably a faulty sensor in the seatbelt handle, where you connect and disconnect it. The problem may just be some dirt on the contact.