Check the gasket between the throttle body and the intake manifold for a vacuum leak.
My Understanding for stalling protection When the motor is overloaded or the Stalling or locking the rotor overheat generated , due the presence the stalling protection operates.
motor mounts?
it sounds like you may have a short somewhere in your lighting wiring. its grounding out and stalling the motor.
There is a recall that was sent out about this exact problem, check with your Chevy dealerAnswerYou will need to replace the control board on wiper motor assembly.
My motor just died in my 1999 chevy malibu and the garage guy told me that since mine was made in California and my vin number started with a J I had to have a 3.1 motor from California to run my car.
Loose connection or blower motor is bad
squirt a little gas in the carb.
You can put in a Chevy 350 motor using special motor mount plates from Summit or any other performance parts place. If you have access to a welder and some time, you could do it. Google Chevy S10 motor swaps and do some research... You can put in a Chevy 350 motor using special motor mount plates from Summit or any other performance parts place. If you have access to a welder and some time, you could do it. Google Chevy S10 motor swaps and do some research...
where is the blower motor on a 2001 chevy blazer
Hemmings motor news: www.hemmings.com
Could be in need of a tune up.
There could be two separate problems. Check the blower motor resister, and the ABS sensors for problems that could cause this.