first check injector pulse if it does not work replace module in dist.
There are several things that can cause shifting problems in your 1989 Chevrolet Blazer transmission. The most common cause of shifting problems is a lack of transmission fluid. Broken shifting forks can also cause transmission shifting problems.
Wiring and internal engine problems can cause misfires.
not exactly it will cause a vaccume leak and therfore cause the computer to compensate but not directly hurt the fuel injectors
There are many things that can cause a 2000 Blazer to have hesitation problems. Some causes could be bad plugs and wires, fuel filter, or the EGR valve.
It is a rare case that the fuel injectors on a jeep give problems. If you are guessing that is the problem then that can get very expensive. It is best to have a qualified shop determine the cause of your problem.
Several problems can cause a 1999 Blazer not to start. There could be a fuel problem or a firing problem. Check for fuel pressure and ignition spark first.
Its your wires they are not connected properly you have what it is called a short or a not connected wire this will cause other problems like flickering lights and other electrical problems
Bad ideal. Why would you want to ? It would just cause bad problems later.
It would be very unlikely. Fuel injectors give very little problems.
No, it probably wont affect the running of the vehicle, but it will affect the control that the VCM has on the fuel injection system. A lost CMP signal will will cause the VCM to pulse the injectors bank to bank rather than individually.
The Vortec Engines with the Spyder, or octopus type fuel injectors had issues with the clip on the fuel injector harness breaking. thus, causing it to come loose which would cause random misfires. also causes could be low compression, bad plugs and wires, dirty injectors, cattilytic converters.
any of a number of things can cause misfiring: * Sparkplugs, * burned valves, * fouled injectors * EGR valve problems... and that's just a few.