9- Primary crash sensor circuit - open or high resistance.
VERY common issue due to ClockSpring corrosion (also code 6, 7 or 9 with the Crown).
Easy to replace, do it yourself in 30 minutes for under $100.00 in parts (buy Ford parts in this case) Disconnect battery ground for min. 10 minutes to ensure thermal switch shuts off AirBag power, unscrew two bolts (covered with plastic caps) on rear of wheel, carefully lift out and disconnect airbag, place face up on a bench. Replace clock spring with kit and provided lubricant, reconnect airbag, bolt it in, reconnect battery done deal.
A malfunction has been detected
You can reset an airbag light that is blinking by connecting an ODBII code reader. The warning can then be removed which will cause the light to go out until another error is detected.
blinking overdrive light indicates a transmission problem. take car to a transmission mechanic
A flashing air bag light on the 1992 Ford Crown Victoria means that the airbag system has been disabled. This could be because it is damaged or because the key for the system is turned to "off."
If your air bag light is on there is a problem. Have the Air Bag system serviced by a qualified service technician. Turning the light off will not solve the problem.
Yes, they are identical
There is a problem with the SRS. Take it to a dealer and have this checked into, ASAP.
You can't "clear" it unless you fix the problem that is causing the light to be on in the first place. That's the way all airbag systems work.
Your Ford Escort, airbag linking light is an indication that the airbag is malfunctioning. You should visit your local Ford dealer to make sure the airbag is functioning properly
it means it needs service check owners manual
I have a '93 with a blinking airbag light. I have been told by a couple of repair places that the only way to fix it is to take apart the entire dash on the car which would be very very expensive. Mine has been blinking for three years.
Reset the light. Turn everything off. Turn the key on and off when the light just goes off. Keep doing this several times, the light will reset